Cumulus Support

espana23

Thanks Steve. I'll check that.

espana23

Hi, I noticed the following issue in regards to the wind speed/gust graphs: When viewing the graph through View->Graphs, the wind speed vs wind gust looks correct (i.e. gust values are higher than speed values). When I view the graph through View->Select-A-Graph, the gust values are lower than the s...

espana23

PaulMy wrote:Use the All time records editor in Cumulus Edit tab.

Enjoy,
Paul

Thanks Paul. That worked great.

espana23

Hi, I've been running Cumulus for 3 years now and through this time have used 2 different weather stations. Some of the max/min data that were recorded are incorrect due to being recorded while performing maintenance on the weather stations, calibrating the weather stations, etc. Is there a way to k...

espana23

I've just had a look at Windfinder, and found my station data on there.. I never even set anything up with them, so they must be scraping another weather network to obtain the data. Are you sending your data to CWOP? If so, that might explain it. I noticed the same with WindAlert. I am not sending ...

espana23

Hi Paul,

Thanks for the information. I will look into VVP, and hopefully I can get it working.

espana23

Hi Steve,

Thanks for the response. Hopefully there is some interest in the future to get this feature developed.

Thanks!

espana23

Mark, What about my 2nd question. Do you know if there is a way to use Cumulus and Weather Display at the same time? I am basically trying to find a way to get Windfinder to display my data in shorter time intervals since most users that use Windfinder want wind readings that are as live as possible...

espana23

Hi Mark,

I saw that also, but I've been emailing with their Support and as of now they only support CWOP.

espana23

Hi, I have been using Cumulus for the last couple of years, and I have it integrated with CWOP. Windfinder told me that in order for me to send them my data, I could do it only through CWOP. Even though I upload my data to the CWOP servers every 5 minutes Windfinder reports my data every 60 minutes....

espana23

Ok, thanks.

espana23

In the readme.txt file of the utility it says not to run the utility while other software are using the station. Does this mean that Cumulus shouldn't be running as well?

espana23

I see. Now I understand. I will try the utility and see how it goes.

Thanks for the help.

espana23

When I use a 30 minutes logger interval it appears to log correctly the wind readings every 30 minutes. Changing it to 5 minutes though does not show any readings for the Recent History data. I will use the utility you mention below to change the logger interval for my Fine Offset station. Why is th...

espana23

I was able to get the timestamps to be on the 5th and 10th minutes by using m=0, m=6, m=11, m=16, m=21, etc. On a related note I have another question about the Recent History webtags and the Logger Interval set at Cumulus. On the wiki, at the section of Recent History webtags it mentions that "...

Cumulus Support

Search found 29 matches

Re: Issue with wind speed/gust graphs

Issue with wind speed/gust graphs

Re: How to reset max/min data

How to reset max/min data

Re: Cumulus integration with Windfinder

Re: Cumulus integration with Windfinder

Re: Cumulus integration with Windfinder

Re: Cumulus integration with Windfinder

Re: Cumulus integration with Windfinder

Cumulus integration with Windfinder

Re: Using time webtags and subtracting minutes

Re: Using time webtags and subtracting minutes

Re: Using time webtags and subtracting minutes

Re: Using time webtags and subtracting minutes

Re: Using time webtags and subtracting minutes