Cumulus Support

ea5xq

Apologies, I redid the whole process again and it works now, it is most likely any file that was not copied correctly

Now it works fine with the RPI 1 3.28.0

Thanks

ea5xq

Apologies for the delay I downloaded CumulusMXDistr3239.zip) and, except cumulus.ini, I copied all the files into previous directory (I kept a copy) I have rolled back the version and now I am in .26 working correctly I observed that I was able to load website (dashboard etc..) but with no data comi...

ea5xq

Hi SInce a long time I have been running my old RPi 1 with CMX successfully. My last versión was 3.26. I have tried to update it to 3.28 but now it does not work anymore, website does not bring data from WH Any restriction of the last version for so old RPi’s? otherwise I will move back to .26 again...

ea5xq

Hi I am running a NOAA receiver with Raspi3B+ and I get pictures from NOAA15,18 and 19, is it possible to include those pictures in my Dashboard in other place in CUmulusMX? Moreover, if possible, could I share them with WU or other platform to provide more added value to CumulusMX data sent? Thanks

ea5xq

Thanks , I had a problem with WeatherCloud and following your advice it works like a charm now, thanks a lot, this forum has helped me a lot setting up CMX in MacOs and recently in RaspBerryPi

ea5xq

CMX is running in RaspBerryPi 1 and it works fine, however I am finding the following messages (just realized now) 2023-07-15 22:08:14.784 Failed to get the latest build version from GitHub 2023-07-15 22:08:14.845 Failed to get the latest build version from GitHub - Exception Type: System.Threading....

ea5xq

Thanks! however, it seems that it is not calculating it correctly, the “feels like” shows the same as the main temp when actually are 2-3C higher

I will send them a support request

ea5xq

Hi I am connecting my WS86861 (like WH10180 FineOffset) to Wunderground, it works fine but I am not able to send it the temp feels like so the wunderground value is the same as original temp. I am trying to test WeatherCloud just in case it shows it correctly but I am facing problems to link Cumulus...

ea5xq

A 1B, a museum piece! :lol: If you use the pre-built rPi image I'm fairly sure that you will have to remove and re-install mono as the 1B has different processor architecture from the image. At the end I was able to make it working! Today, after the whole night compiling “mono”, my old (very old, 2...

ea5xq

Currently I am using CumulusMX (running in MacOS) with my station WATSON WS8681(similar to WH10180 of FineOffset). My aim is moving all the software to RPi 1B that I have to control 24x7 the station. I wanted to add new sensors such as UV but I am aware that it is not possible to my model (I have no...

ea5xq

Thanks a lot Mark, I was pretty sure that I was the one that I needed to understand better the tool. So now, I will try to learn how to export data, publish in online an so forth. Also I will take out the dust over my old RaspBerry Pi 1B and I will try to install the RPi version just in case it work...

ea5xq

Hi

Attached you can find the MxDiags of yesterday (210345) and this morning (090711)

It is also interesting the oscillations of the data collected (I assume that the problem is the Weather station's sensor that is becoming crazy from time time ...)

ea5xq

This is probably because you didn't either have your computer up or your Weather Station attached and the rollover point i.e. 12 midnight is the default. It is assumed the CumulusMX is up and running 24/7 or at least the weather station is attached when it is up and running, and your computer shoul...

ea5xq

Thanks Mark, just check it. Tomorrow I will get the results By the way, I have observed that in Today/Yesterday option there is not date from yesterday as you can see in the picture, and yesterday I was executing the tool (see picture) On the other hand, I found some options in MySQL that are not ma...

ea5xq

Hi, Just installed CumuluxMX with Mono for getting the data from my WATSON WS8681 from FineOffset It works like a charm, congratulations! I need to play a little bit more with configurations and so on, but it does its job Just a question, it seems that WS8681 (like WH1080) records the data internall...

Cumulus Support

Search found 21 matches

Re: New version of CMX compatible with raspberry Pi 1?

Re: New version of CMX compatible with raspberry Pi 1?

New version of CMX compatible with raspberry Pi 1?

NOAA pictures

Re: Mono SSL error connecting to Windy and other web sites

Re: Instructions: Installing CumulusMX on Raspberry Pi

Re: Wunderground upload Temp feels like

Wunderground upload Temp feels like

Re: Cumulus MX on Mac with WH1080

CumulusMX with an hybrid of FineOffset WS8681 and Arduino/RPi?

Re: Cumulus MX on Mac with WH1080

Re: Cumulus MX on Mac with WH1080

Re: Cumulus MX on Mac with WH1080

Re: Cumulus MX on Mac with WH1080

Cumulus MX on Mac with WH1080