Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Search found 171 matches
- Wed 04 Jan 2012 9:16 pm
- Forum: Fine Offset/EasyWeather
- Topic: The inside of the ws-1081
- Replies: 121
- Views: 302568
Re: The inside of the ws-1081
on my unit the pressure stays as it is when i switch on the light. though i only have the leds on half power. if the drop happens at full power then it probably drains to much and the pressure sensor reacts to it. you could try to use a resistor between a full power lead and the switch,the value you...
- Wed 07 Sep 2011 8:43 pm
- Forum: SteelSeries Gauges
- Topic: SteelSeries Gauges - version 1.0
- Replies: 689
- Views: 213579
- Wed 07 Sep 2011 7:49 pm
- Forum: SteelSeries Gauges
- Topic: SteelSeries Gauges - version 1.0
- Replies: 689
- Views: 213579
Re: SteelSeries Gauges - version 1.0
dutch translation: [Forecast] Forecast=Vooruitzicht notavailable=Niet beschikbaar exceptional=Uitzonderlijk weer forecast1=Gestabiliseert forecast2=Mooi weer forecast3=Verbetert forecast4=Goed,wordt minder stabiel forecast5=Goed,buien mogelijk forecast6=Redelijk goed,verbeterend forecast7=Redelijk g...
- Thu 21 Apr 2011 6:48 pm
- Forum: Homebuilt
- Topic: Touch Screen - replaced by switches
- Replies: 18
- Views: 7726
Re: Touch Screen - replaced by switches
nice job,i never got to finish it,glad you did. :clap: always to busy with other things at the same time (right now i'm working on an automated system to feed plant furtiliser daily and weekly (2sorts) in a small shrimp tank). in dutch and english: http://home.zonnet.nl/rsetteur/doseerspuit3/index_d...
- Mon 18 Apr 2011 11:53 am
- Forum: General
- Topic: Astronomy and Astrophotography
- Replies: 74
- Views: 21033
Re: Astronomy and Astrophotography
http://home.hiwaay.net/~krcool/Astro/moon/moonorange/ but you already know that, beautifull moon though,i saw the same this morning at 05.00 going to work, only thing missing was a witch on a broomstick :P when you have a go at saturn,don't over-magnify,it will only get more blurry. a small sharp o...
- Sun 17 Apr 2011 7:00 pm
- Forum: General
- Topic: Astronomy and Astrophotography
- Replies: 74
- Views: 21033
Re: Astronomy and Astrophotography
yes,been a while :D if i remember correctly,your focus problem could be the fact of the build in IR filter in every camera, that focalpoint point gives a shift,.(hope you know what i mean). with the tuocam i had removed it(which was very easy) i mention this all from memory,so i could be wrong,will ...
- Sun 17 Apr 2011 8:15 am
- Forum: General
- Topic: Astronomy and Astrophotography
- Replies: 74
- Views: 21033
Re: Astronomy and Astrophotography
has been years since i've done this, but the moon does have a different speed than deepsky. the autostar had a different setting for it. about registax,it's easier to use an avi file(about 10 seconds is enough) to make a picture,for every frame has almost the same alignment.(if your camera can make ...
- Wed 23 Feb 2011 11:06 pm
- Forum: Homebuilt
- Topic: An idea for improved Fine Offset wind vane electronics
- Replies: 26
- Views: 11828
Re: An idea for improved Fine Offset wind vane electronics
ah,i knew i saw it somewhere here. i noticed that the voltages have a "window" of 0.06 volts,but maybe that is for the chip they used, also the windows of the resistors can be calculated from these values, doesn't the use of parasitic power influence the accuracy? is it buffered in some ki...
- Wed 23 Feb 2011 10:40 pm
- Forum: Homebuilt
- Topic: An idea for improved Fine Offset wind vane electronics
- Replies: 26
- Views: 11828
Re: An idea for improved Fine Offset wind vane electronics
i measured open circuit and were pretty accurate with these values here which are the official ones i found somewhere.
i also remember these values in voltage for 1-wire,maybe usefull:
(on last page)
http://www.hobby-boards.com/catalog/lin ... Manual.pdf
.
i also remember these values in voltage for 1-wire,maybe usefull:
(on last page)
http://www.hobby-boards.com/catalog/lin ... Manual.pdf
.
- Wed 23 Feb 2011 8:22 pm
- Forum: Homebuilt
- Topic: An idea for improved Fine Offset wind vane electronics
- Replies: 26
- Views: 11828
Re: An idea for improved Fine Offset wind vane electronics
when i experimented with my vane add-on,these were the values i found, N 33k NNE 6.58k NE 8.22k ENE 0.894k E 1k ESE 0.69k SE 2.2k SSE 1.41k S 3.9k SSW 3.14k SW 16k 1 WSW 14.18k W 120k WNW 42.1k NW 64.9k NNW 21.9k maybe it will help you a little
- Tue 22 Feb 2011 7:45 pm
- Forum: Homebuilt
- Topic: An idea for improved Fine Offset wind vane electronics
- Replies: 26
- Views: 11828
Re: An idea for improved Fine Offset wind vane electronics
i totally agree with that,
rocketman's plan is much better,
and also smaller to build,which is important too.
for me,i would be stuck to the programming by wires,
has it's charme as well.
(i really should learn that eprom stuff,saves me lot of wires crossed )
rocketman's plan is much better,
and also smaller to build,which is important too.
for me,i would be stuck to the programming by wires,
has it's charme as well.
(i really should learn that eprom stuff,saves me lot of wires crossed )
- Tue 22 Feb 2011 5:26 pm
- Forum: Homebuilt
- Topic: An idea for improved Fine Offset wind vane electronics
- Replies: 26
- Views: 11828
Re: An idea for improved Fine Offset wind vane electronics
a very good idea. i know nothing about programming eproms. it should be easier and less soldering than my "old" analog electronics. for a plan "B" you could consider using a combination of a NOT gate with a AND gate for the 4 main wind directions and a AND gate for the in-between...
- Wed 16 Feb 2011 8:40 pm
- Forum: Homebuilt
- Topic: Night sky images?
- Replies: 101
- Views: 32601
Re: Night sky images?
you can also let the (web)cam piggybak on a small telescope with goto-system. eg the MEADE etx-70 isn't very expensive second hand. so it would follow the earth rotation and allows longer exposures,without turning the stars into lines. mods and info: http://www.weasner.com/etx/menu.html done this a ...
- Mon 07 Feb 2011 6:55 pm
- Forum: Fine Offset/EasyWeather
- Topic: Photos of the insides of Fine Offset sensors.
- Replies: 173
- Views: 402080
Re: Photos of the insides of Fine Offset sensors.
Any possibility to change the transmission intervall from 48 seconds to say 30,10 or even continuously?
yet another "mystery" solved of this "simple station".
yet another "mystery" solved of this "simple station".
- Mon 07 Feb 2011 6:33 pm
- Forum: Homebuilt
- Topic: Homebuilt Wind Vane 1deg resolution
- Replies: 27
- Views: 15817
Re: Homebuilt Wind Vane 1deg resolution
Maybe instead of leds you could "consider optical interrupter switches". http://img-europe.electrocomponents.com/largeimages/R219249-01.jpg tricky thing is you would need 3 different sizes to read the disk,or make 3 separete disks for each code track. you could find them in an old vcr,usua...