Cumulus Support

broadstairs

Strange, I have a wh32 and it overrides the temp from my ws80 which is what CMX picks up automatically with no settings needed to be changed in CMX.

Stuart

broadstairs

What does the WSView+ app show for temps? As long as the WH32 is enabled in sensorid on the app it should be seen by CumulusMX automatically.

Stuart

broadstairs

Is the compression test the same as the HTTPS Certificate issue reported on the other thread? i.e. have you temporarily enabled the advanced option to ignore certificate errors? MX reads the culture name directly from the current culture being used. {CultureInfo.CurrentCulture.DisplayName} [{Cultur...

broadstairs

I am also seeing the errors when checking the upload compression which worked before but this instance is not doing any uploads however it carries on no problem as it is not uploading. The compression test worked OK on the previous RC#1. I'll wait to try this on my other instance as that is uploadin...

broadstairs

I agree it's not critical but today at about the same time on the GW1200 it did successfully get the f/w value and confirmed no update was required but it did not reset the alarm, and more than 24 hours had elapsed when I checked. Mildly annoying because initially I went looking for another update! ...

broadstairs

No I don't think it's directly related it seems to me the error is mishandled, it should not raise the f/w update flag but be retried. Stuart I just checked todays log file and the operation worked OK and it says it's the latest f/w, however the f/w alarm is still set! So it was because the two proc...

broadstairs

I have two copies of CMX running V4 using two gateways (GW2000 and GW1200) on the same Linux PC. Yesterday I got an alarm saying the GW1200 needed a F/W update but it is running the latest F/W. Looking at the log I saw this- GW1200 2024-05-01 13:00:03.094 - WH35CH8 sensor = disabled 2024-05-01 13:00...

broadstairs

Mark this I'm afraid is an issue we will often see where Ecowitt fail to provide updated documentation along side the f/w updates.

Stuart

broadstairs

Nice to see that Report Post button is there as we have new spam and someone beat me to reporting it!

Stuart

broadstairs

Yes my GW1200 and GW1100 run into this as well on V4

Stuart

broadstairs

Honestly, do we, ordinary users, really need a report button? Personally, I think not. I visit the forum every day and almost every day I see that administrators are available (are distinguished by the color red). This forum, despite the wealth of knowledge on it, is not very large. And the truth i...

broadstairs

What I don't understand is why ordinary users do not have a 'Report Post' option. This is normal practice to alert a moderator to the existence of a post which may fall foul of forum rules and they should take action if it does indeed fail to adhere to rules. I'm sure the forum software must have an...

broadstairs

So all I see is

cmxspam.jpeg

Stuart

broadstairs

Definitely no 'Report Post' option that I can find for a normal user (like me) which most other boards have. Would be a good addition!

Stuart

broadstairs

I'd ask to be moved to another ip address by the hosting company. They obviously have some bad actors on that shared host.

Stuart

Cumulus Support

Search found 495 matches

Re: Ecowitt Advice

Re: Ecowitt Advice

Re: V4 RC #2 issues

V4 RC #2 issues

Re: Check for Ecowitt F/W update fails

Re: Check for Ecowitt F/W update fails

Check for Ecowitt F/W update fails

Re: Ecowitt firmware version: GW1100C_V2.3.2

Re: spam

Re: Ecowitt firmware version: GW1100C_V2.3.2

Re: spam

Re: spam

Re: spam

Re: spam

Re: EUwarning.php issues