Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

0 wind speed

Discussion specific to Fine Offset and similar rebadged weather stations
Post Reply
foxy1305
Posts: 29
Joined: Sun 13 Jan 2013 3:21 pm
Weather Station: Fine offset
Operating System: Windows 7
Location: South west

0 wind speed

Post by foxy1305 »

I have noticed over the last few days it appears my wind speed is reading 0. The cups are turning no problem, just not registering inside. Any ideas?
User avatar
MickinMoulden
Posts: 499
Joined: Mon 20 Dec 2010 12:12 pm
Weather Station: WS-1081 with rain gauge mod
Operating System: Windows 7 & 1.9.3 b1059
Location: Palmerston, NT, Australia
Contact:

Re: 0 wind speed

Post by MickinMoulden »

foxy1305 wrote:I have noticed over the last few days it appears my wind speed is reading 0. The cups are turning no problem, just not registering inside. Any ideas?
broken cable, cable not plugged in, bad connection (wiggle it), extension cables with bad connections (cut them off and solder together), problem with anemometer (take down and assess the magnet and reed switch), cable not connected to/broken/bad connection with wind vane. Hope that helps.
Michael, Palmerston, NT Australia www.Palmerston-WeatherImageNo image? I'm offline!
ImageImage
Post Reply