Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Data appears to have stopped
-
- Posts: 38
- Joined: Mon 29 Aug 2016 6:40 am
- Weather Station: AE WS3803
- Operating System: Windows 10
Data appears to have stopped
every hour at exactly the same time I get the message "data appears to have stopped"
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data appears to have stopped
This happens when Cumulus hasn't been able to obtain any data from the console for one minute. Make sure you have debug logging turned on, and also turn on data logging, then zip up the latest diags file (normally cumulus.009) after it's been running for a few hours like that, and attach the zip file here.
Steve
-
- Posts: 38
- Joined: Mon 29 Aug 2016 6:40 am
- Weather Station: AE WS3803
- Operating System: Windows 10
Re: Data appears to have stopped
Ok will do have attached the file for now to see if it's any help, will post again in a few hours
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data appears to have stopped
Sorry, my reply is erroneous - I was thinking of Cumulus MX. If you turn debug logging on, this will cause a debug.log file to be created. I'll need that file and the Cumulus.009 file after it's been running for a few hours with debug logging turned on. The part about zipping up the file was not erroneous, however, could you please make sure you do that?
Is it always at 21 minutes past the hour when this happens, regardless of when you start Cumulus?
Is it always at 21 minutes past the hour when this happens, regardless of when you start Cumulus?
Steve
-
- Posts: 38
- Joined: Mon 29 Aug 2016 6:40 am
- Weather Station: AE WS3803
- Operating System: Windows 10
Re: Data appears to have stopped
Where is the debug file located? and yes always 21 mins past the hour,
Sorry will zip the file next time
Sorry will zip the file next time
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data appears to have stopped
Once you've turned on debug logging, the debug.log file should appear in the folder where Cumulus is installed.
Steve
-
- Posts: 38
- Joined: Mon 29 Aug 2016 6:40 am
- Weather Station: AE WS3803
- Operating System: Windows 10
Re: Data appears to have stopped
Have added the Zipped files
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data appears to have stopped
It's a side effect of the 'synchronise Fine Offset reads' operation. When the two avoidance cycles and the real time clock line up in a certain way, it isn't allowed to read data for over a minute, so the 'data appears to have stopped' is triggered.
Steve
-
- Posts: 38
- Joined: Mon 29 Aug 2016 6:40 am
- Weather Station: AE WS3803
- Operating System: Windows 10
Re: Data appears to have stopped
Is there anyway to stop the errors from displaying?
I did have a USB lock up last night too
I did have a USB lock up last night too
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data appears to have stopped
Set ReportDataStoppedErrors=0 in the [Station] section of Cumulus.iniimballinger wrote:Is there anyway to stop the errors from displaying?
The solar models do seem to be worse in that regardI did have a USB lock up last night too
Steve
-
- Posts: 38
- Joined: Mon 29 Aug 2016 6:40 am
- Weather Station: AE WS3803
- Operating System: Windows 10
Re: Data appears to have stopped
That's not in there can I add the line?
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Data appears to have stopped
Yes, that's how it works for configuration items which can only be set by editing Cumulus.ini - http://wiki.sandaysoft.com/a/Cumulus.in ... g_the_file
Steve