Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Fine offset. Readings keep stopping
-
- Posts: 1
- Joined: Mon 19 Feb 2018 9:07 pm
- Weather Station: Fine Offset
- Operating System: Windows 10
Fine offset. Readings keep stopping
My fine offset works just fine but stops at 23:59 every night. I’m using Windows 10 and have tried all settings I can think about ie. hibernation, sleep hard drive turning off to name but a few worked perfectly on xp and vista. Any ideas would be welcome thanks
- mcrossley
- Posts: 12815
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Fine offset. Readings keep stopping
Post your diagnostics, there may be a clue in there.
- ConligWX
- Posts: 1641
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Fine offset. Readings keep stopping
go into Device Manager
open the USB Serial Bus Controllers.
then select each one an check their Power Management Tab.
you may see there a box that is enabled (ticked) to "Allow the computer to turn off this device to save power" you might want to disable this.
One of these will be controlling your Console.
also post your ouput from
> powercfg /L
open the USB Serial Bus Controllers.
then select each one an check their Power Management Tab.
you may see there a box that is enabled (ticked) to "Allow the computer to turn off this device to save power" you might want to disable this.
One of these will be controlling your Console.
also post your ouput from
> powercfg /L
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0