Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

FO on the LAN?

Discussion specific to Fine Offset and similar rebadged weather stations
harrym1byt
Posts: 260
Joined: Fri Aug 15, 2008 5:22 pm
Weather Station: WH 1081 (EasyWeather type)
Location: Garforth, W. Yorks, UK
Contact:

FO on the LAN?

Postby harrym1byt » Wed Jun 27, 2018 7:44 am

I have not been keeping up to date on developments, but have there been any developments which would allow me to make the FO's data available on my LAN please?

My present setup is that I have the FO display console in my 'office' (a small spare bedroom), this is USB connected to an old WinXP desktop system. Day to day, usually use one or other W10 laptops, but the WinXP is only rarely turned on, usually just to download the data from the FO.

Ideally, I need a small low power consumption system [1], able to interface the FO unit to the LAN, then something I could run on a laptop to grab data from item [1].

User avatar
Toxic17
Posts: 678
Joined: Mon May 19, 2014 10:45 pm
Weather Station: Davis VPro2 Plus
Operating System: Debian 9.5 Stretch
Location: Bangor, NI
Contact:

Re: FO on the LAN?

Postby Toxic17 » Wed Jun 27, 2018 8:14 am

so you want a device to collect data from you fine offset console, then have another device grab/download data from that. why?

why not just have one device running CumulusMX 24/7 and then either keep open the cumulusmx console so you can look at the data in realtime, or OR using a laptop surf too the CumulsMX console to view the data.

Failing that if you upload the data to a webhost or Weather data website like WU, PWSWeather, Met Office, etc you can then view the data anywhere in the world.
Regards Simon

https://www.conligwx.org
https://www.conligwx.org/pws/
https://twitter.com/conligwx
Davis Vantage Pro2+ - CumulusMX v3.0.0 (build 3043) + Saratoga/PWS
Image

harrym1byt
Posts: 260
Joined: Fri Aug 15, 2008 5:22 pm
Weather Station: WH 1081 (EasyWeather type)
Location: Garforth, W. Yorks, UK
Contact:

Re: FO on the LAN?

Postby harrym1byt » Wed Jun 27, 2018 10:52 am

I do not wish to have a PC or laptop running 24/7, but it would be useful to be able to locate the FO console/display where it suits me. Uploading live data to a website, involves having a PC or laptop on to upload the data.

My FO console/display has to be located upstairs, so it can receive reliable data from the outdoor sensors at the far end of the back garden. My most used laptop is in the living room, using wifi to connect to the internet. It would be good not to have to go up to the 'office' to turn the desktop on, just to regularly download the data from the console.

User avatar
mcrossley
Posts: 5192
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Stretch Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: FO on the LAN?

Postby mcrossley » Wed Jun 27, 2018 11:53 am

How about a Raspberry Pi running 24x7? They only use about a watt of power.

I run Cumulus, two websites, a database and some 'experimental' stuff on mine.

User avatar
Toxic17
Posts: 678
Joined: Mon May 19, 2014 10:45 pm
Weather Station: Davis VPro2 Plus
Operating System: Debian 9.5 Stretch
Location: Bangor, NI
Contact:

Re: FO on the LAN?

Postby Toxic17 » Wed Jun 27, 2018 2:50 pm

the console on the FO needs a USB connection so you must have a wired connection to a device for it to download the data in the first place whether you like it or not. if you cannot be bothered going upstairs to turn you desktop on, then I suggest you move your FO console downstairs and then turn your laptop on with a USB connection to that. then you can view the data without going upstairs.

As Mark has suggested a RaspPi is the most affordable and inexpensive device to use and can host a website and CumulsMX 24/7 without eating your electric bill. and since it is on the local network in your house you can then access the CumulsMX WebGUI to view the data with any device you wish.
Regards Simon

https://www.conligwx.org
https://www.conligwx.org/pws/
https://twitter.com/conligwx
Davis Vantage Pro2+ - CumulusMX v3.0.0 (build 3043) + Saratoga/PWS
Image

harrym1byt
Posts: 260
Joined: Fri Aug 15, 2008 5:22 pm
Weather Station: WH 1081 (EasyWeather type)
Location: Garforth, W. Yorks, UK
Contact:

Re: FO on the LAN?

Postby harrym1byt » Wed Jun 27, 2018 4:59 pm

Toxic17 wrote:the console on the FO needs a USB connection so you must have a wired connection to a device for it to download the data in the first place whether you like it or not. if you cannot be bothered going upstairs to turn you desktop on, then I suggest you move your FO console downstairs and then turn your laptop on with a USB connection to that. then you can view the data without going upstairs.

As Mark has suggested a RaspPi is the most affordable and inexpensive device to use and can host a website and CumulsMX 24/7 without eating your electric bill. and since it is on the local network in your house you can then access the CumulsMX WebGUI to view the data with any device you wish.


That sounds interesting and I read a little of the thread, but it went a little over my head and I also thought that project had been dropped?

Idiots guide - What would I need to do to get that up and running?

harrym1byt
Posts: 260
Joined: Fri Aug 15, 2008 5:22 pm
Weather Station: WH 1081 (EasyWeather type)
Location: Garforth, W. Yorks, UK
Contact:

Re: FO on the LAN?

Postby harrym1byt » Thu Jun 28, 2018 8:26 am

harrym1byt wrote:
That sounds interesting and I read a little of the thread, but it went a little over my head and I also thought that project had been dropped?

Idiots guide - What would I need to do to get that up and running?


Anyone, please??

User avatar
mcrossley
Posts: 5192
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Stretch Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: FO on the LAN?

Postby mcrossley » Thu Jun 28, 2018 8:48 am

Someone on the forum dazza I think has made a rPi boot image with CumulusMX pre-installed, so in theory all you would need to do would be to buy a rPi/case/PSU/SD Card and write that image to the SD card, power on your rPi, then configure Cumulus for your station. Simples eh? What could possibly go wrong! :lol:

Here's the topic...
viewtopic.php?f=27&t=16913&start=15&hilit=raspberry+pi+image

harrym1byt
Posts: 260
Joined: Fri Aug 15, 2008 5:22 pm
Weather Station: WH 1081 (EasyWeather type)
Location: Garforth, W. Yorks, UK
Contact:

Re: FO on the LAN?

Postby harrym1byt » Thu Jun 28, 2018 2:04 pm

mcrossley wrote:Someone on the forum dazza I think has made a rPi boot image with CumulusMX pre-installed, so in theory all you would need to do would be to buy a rPi/case/PSU/SD Card and write that image to the SD card, power on your rPi, then configure Cumulus for your station. Simples eh? What could possibly go wrong! :lol:

Here's the topic...
viewtopic.php?f=27&t=16913&start=15&hilit=raspberry+pi+image


Oh dear, that doesn't read very promising :o

harrym1byt
Posts: 260
Joined: Fri Aug 15, 2008 5:22 pm
Weather Station: WH 1081 (EasyWeather type)
Location: Garforth, W. Yorks, UK
Contact:

Re: FO on the LAN?

Postby harrym1byt » Sat Jun 30, 2018 4:51 pm

Right, so what I think I understand and whilst I wait for my Pi to turn up here...

The Pi can be left permanently to the FO console, from which it forms a web page on the Pi which can be accessed via the LAN (and maybe from the WAN?). Am I correct in guessing that the Pi also stores the historical data received from the FO? On the SD card, or maybe on a USB HDD, or similar?


Return to “Fine Offset/EasyWeather”

Who is online

Users browsing this forum: No registered users and 2 guests