Hi
I have som problems getting data from Easy Weather to Cumulus, and the debug file has the folowing error:
1368.498 : 30.12.2010 12:02:00 Minute timer 2
1380.395 : Error processing EasyWeather file: '0.0' is not a valid floating point value
I have tryed the stable versjon and the new beta, but the error is the same.
What can I do to fix this problem?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
No data from Easyweather in Cumulus
- Orion
- Posts: 277
- Joined: Mon 08 Nov 2010 5:51 pm
- Weather Station: WH1081 (Maplin)
- Operating System: windows 10 64bit
- Location: Paignton Devon UK
- Contact:
Re: No data from Easyweather in Cumulus
If you are running cumulus then you do not need easy-weather apart from setting the station log interval
recommended that you do not to run both programs at the same time
here is a copy of my settings for the WH1080
recommended that you do not to run both programs at the same time
here is a copy of my settings for the WH1080
You do not have the required permissions to view the files attached to this post.
Last edited by Orion on Thu 30 Dec 2010 12:44 pm, edited 1 time in total.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: No data from Easyweather in Cumulus
Yes, far better not to run EW at the same time and use the Fine Offset setting in Cumulus.
As for the problem:
As for the problem:
It looks like your system uses a comma as a decimal separator (so that's what Cumulus expects) but your EW log file uses decimal points (periods/full stops).1380.395 : Error processing EasyWeather file: '0.0' is not a valid floating point value
Steve
-
- Posts: 2
- Joined: Thu 30 Dec 2010 10:44 am
- Weather Station: WH1080
- Operating System: Windows XP SP3
- Location: Norway, Tønsberg
Re: No data from Easyweather in Cumulus
That worked fine!
Thanks for the help!
Thanks for the help!