could anyone Help translate this graph?

[MarkAUS]

I'm attaching the graph on the wind data. Noticing that there isn't any information plotted on wind direction but lots on average wind direction. could I have a setting wrong?


thanks

[Rayle]

I'm attaching the graph on the wind data. Noticing that there isn't any information plotted on wind direction but lots on average wind direction. could I have a setting wrong?


thanks

I zoomed in on your attachment as it looks pretty much the same results I am getting. the direction and average are right on top of each other, this may be because we have the log refresh too frequent.
Try changing the colors, Black and White, then White and Black and you should see what I mean by them being on top of each other.

[steve]

The 'current' and 'average' values coincide. Is this just after Cumulus has started? The wind direction graphs always coincide after a restart, as there is only one set of values available for plotting.

[MarkAUS]

Steve hi

It's just after Cumulus has started when I looked at the data.

Rayle, do I set somehow the data log frequency?

Thks

[Orion]

The WH1081 saves history data every 30mins by default this can only be changed using the easy-weather software it is recommended that this is changed to 10mins
and in cumulus settings set data log interval to 10mins also
The WH1081 reports every 48secs this cannot be changed