Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

How to connect?

Discussion specific to Fine Offset and similar rebadged weather stations
Post Reply
alvess
Posts: 5
Joined: Wed 24 Sep 2008 8:18 am

How to connect?

Post by alvess »

Hello.

I resently found this nice software 1.7.17, but I have problems connecting to my
weatherstation wh1081.

I have FOSHK latest easyweather installed, this is working fine.

When i try to configure 1.7.17 in either direct mode or to use the .dat file i end upp with diffrent errors:

direct mode (easyweather closed) : No values imported
direct mode (esyweather closed) + path to .dat filled in: Some values, but 1.7.17 craches.
(I have tried your .ini fix)
.dat mode (easyweather running): No values imported

please help me with the settings? ;)
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: How to connect?

Post by steve »

The best method is to use direct mode and not run Easyweather at all. The only configuration needed is to tick the 'Fine Offset' box.

If this doesn't work, stop Cumulus, edit the Cumulus.ini file, and add a line in the [Station] section:

Logging = 1

Run Cumulus, wait 5 minutes, then send me (to steve@sandaysoft.com) the debug.log file from the Cumulus installation folder.

Steve
Steve
alvess
Posts: 5
Joined: Wed 24 Sep 2008 8:18 am

Re: How to connect?

Post by alvess »

Ok Steve.

"Run Cumulus, wait 5 minutes, then send me (to steve@sandaysoft.com) the debug.log file from the Cumulus installation folder."

Will do.... when I get home from work.

Becuse when only the "fine offset" option is checked, no values are imported to camulous.

Br alvess
alvess
Posts: 5
Joined: Wed 24 Sep 2008 8:18 am

Re: How to connect?

Post by alvess »

Hello Steve.

You fixed the problem with 1.8.0 thanks! :D


//alvess
Post Reply