Sandaysoft

Support forum for Cumulus weather station software
It is currently Wed Jun 19, 2013 9:31 am
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4

All times are UTC




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Fine Offset WH1081 Rain Gauge Question!
PostPosted: Tue Jan 17, 2012 7:02 pm 
Offline

Joined: Mon Jan 16, 2012 2:59 pm
Posts: 6
Location: Newbury, Berkshire
Weather Station: Fine Offset WH1081
Operating System: Vista Home Premium SP2
First off I would like to say thanks for such an interesting and helpful forum.

Yesterday I ordered one of Weather Stations from Maplin (Fine Offset WH1081), which was delivered this afternoon. But having read through the customer reviews I see that it is recommended that you use a piece of gauze to prevent insects from entering the Rain Gauge.

So after looking on Amazon, I was let with these two very simple questions:

1) What type of gauze should be used?

2) Where can it be bought from?

Any help would be appreciated, from this newbie!

Thanks again.,

Gazzadp


Top
 Profile  
 
 Post subject: Re: Fine Offset WH1081 Rain Gauge Question!
PostPosted: Tue Jan 17, 2012 9:18 pm 
Offline

Joined: Mon Dec 14, 2009 8:52 pm
Posts: 16
Location: Canvey Island
Weather Station: Fine Offset
Operating System: WHS
Hi,
I used some spare gauze that is used in dress making.
I think it is used as an underskirt to strengthen the outer fabric...

I folded it around the rain gauge like wrapping a present and stuck it to itself using some hot glue from a hot glue gun.

Mine is still going strong after a couple of years of service.

_________________
Kevin
Canvey Island | http://www.canveyweather.co.uk
| Wunderground PWS ID - IESSEXCA3

Image


Top
 Profile  
 
 Post subject: Re: Fine Offset WH1081 Rain Gauge Question!
PostPosted: Wed Jan 25, 2012 3:01 pm 
Offline

Joined: Mon Jan 16, 2012 2:59 pm
Posts: 6
Location: Newbury, Berkshire
Weather Station: Fine Offset WH1081
Operating System: Vista Home Premium SP2
Firstly many thanks for the prompt reply.

Secondly my apologies for the terrible splleings and grammar in my OP! :oops:

Anyway following the advice I went to my local fabric/dressmaking shop and bought some dress making gauze/mesh, I chose quite a fine weave nylon mesh, bought half a metre length (x about 4ft 6" roll width) so way, way more than needed but it was only 50p.

Then had a wander round the shops and found a Bostic Hot Melt Glue Gun in Wilkinson for about £6.

So all being well I hope to set up my weather station in the next couple of days, weather permitting that is! :roll:

Thanks again for the help and advice much appreciated.

Gazzadp


Top
 Profile  
 
 Post subject: Re: Fine Offset WH1081 Rain Gauge Question!
PostPosted: Wed Jan 25, 2012 6:13 pm 
Offline

Joined: Mon Dec 14, 2009 8:52 pm
Posts: 16
Location: Canvey Island
Weather Station: Fine Offset
Operating System: WHS
No problem :)

Best of luck!

_________________
Kevin
Canvey Island | http://www.canveyweather.co.uk
| Wunderground PWS ID - IESSEXCA3

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group