Blank Web Pages

apple8 · **Posted:** Sat Sep 22, 2012 1:51 am

I think I need some help.

When I access my site I get blank weather pages except for NOAA reports. The HTM files on the website are showing zero bytes as are the HTML files in the Web folder on the PC. I have checked the ftp log and that looks ok. That is about as far as my smarts goes, so any suggestions will be appreciated.

PaulMy · **Posted:** Sat Sep 22, 2012 3:01 am

I tried your link http://www.blazingcomet.com/weather/index.htm but cannot get it to load,

Paul

beteljuice · **Posted:** Sat Sep 22, 2012 3:50 am

Looks ok to me atm "Page updated 22/09/2012 1:30:15 PM"

apple8 · **Posted:** Sat Sep 22, 2012 4:18 am

I found that the html "T" files were missing from Web folder. updated cumulus and data was in files again. For a while I could access pages through by using ftp in front of web address but not without it. Now I am getting FTP errors and not uploading at all. ftplog shows that it is trying to connect to a different IP address than it was earlier.

steve · **Posted:** Sat Sep 22, 2012 8:54 am

apple8 wrote:

Now I am getting FTP errors and not uploading at all. ftplog shows that it is trying to connect to a different IP address than it was earlier.

Assuming the ftp errors are connection failures, it sounds like perhaps your web host has done some DNS changes.

apple8 · **Posted:** Sat Sep 22, 2012 9:37 am

Yes, I cannot even get to the home page anymore. They (Glovine) changed the DNS a few weeks ago and it hasn't been right since with out of date pages etc. I am in the process of temporarily moving the weather over to my ISP's users webspace.

apple8 · **Posted:** Mon Sep 24, 2012 1:51 pm

I am now find that I can only upload data that will show on the site if I use Web Update and do not prefix the host name with ftp. in the configuration panel.

Does not appear to attempt any auto update (yes, it is ticked) so I am still stuck. If these give any clues it may help if anyone can point me in the right direction.

steve · **Posted:** Mon Sep 24, 2012 2:04 pm

apple8 wrote:

and do not prefix the host name with ftp. in the configuration panel.

What's the actual host name? blazingcomet.com? I use Google for DNS, and the version with 'ftp' resolves to the same IP address as the version without for me:

C:\Users\steve>nslookup blazingcomet.com
Server: google-public-dns-a.google.com
Address: 8.8.8.8

Non-authoritative answer:
Name: blazingcomet.com
Address: 119.252.189.51

C:\Users\steve>nslookup ftp.blazingcomet.com
Server: google-public-dns-a.google.com
Address: 8.8.8.8

Non-authoritative answer:
Name: ftp.blazingcomet.com
Address: 119.252.189.51

Quote:

Does not appear to attempt any auto update (yes, it is ticked) so I am still stuck. If these give any clues it may help if anyone can point me in the right direction.

Your web site is showing zero for all readings, so Cumulus is presumably not getting any data from the station, which is why it hasn't enabled auto-updates. If you zip up the diags folder and attach it, I'll see if I can determine the cause.

PaulMy · **Posted:** Mon Sep 24, 2012 2:11 pm

Your Now, Gauges and Yesterday show 0
Trends graphs shows nothing except for Temp and Rain
NOAA style has nothing after Sep 17

Your Today shows data, as does This Month, This Year and Records but these are likely from before your problem.

Paul
Edit to add Yesterday shows 0 data

apple8 · **Posted:** Tue Sep 25, 2012 1:10 pm

steve wrote:

What's the actual host name? blazingcomet.com? I use Google for DNS, and the version with 'ftp' resolves to the same IP address as the version without for me:

For me it is:
Gordon$ nslookup blazingcomet.com
Server: 192.168.1.1
Address: 192.168.1.1#53

Non-authoritative answer:
Name: blazingcomet.com
Address: 119.252.189.51

Gordon$ nslookup ftp.blazingcomet.com
Server: 192.168.1.1
Address: 192.168.1.1#53

Non-authoritative answer:
Name: ftp.blazingcomet.com
Address: 202.60.89.183

Gordon$ nslookup blazingcomet.com
Server: 8.8.8.8
Address: 8.8.8.8#53

Non-authoritative answer:
Name: blazingcomet.com
Address: 119.252.189.51

Gordon$ nslookup ftp.blazingcomet.com
Server: 8.8.8.8
Address: 8.8.8.8#53

Non-authoritative answer:
Name: ftp.blazingcomet.com
Address: 119.252.189.51

Quote:

Your web site is showing zero for all readings, so Cumulus is presumably not getting any data from the station, which is why it hasn't enabled auto-updates.

I was not aware of that, I had the data uploading to my ISP user webspace from another PC, thinking that Cumulus would upload zero data to Blazingcomet.com in the interim.
It is now uploading when reconnected depending on whether I use the ftp. prefix or not.

As can be seen above the when using the ftp. prefix it goes to a different address and there is no update on the weather website when using auto DNS.

One hour later the above addresses swapped now it uploads with the ftp. prefix and not without :bash:

steve · **Posted:** Tue Sep 25, 2012 2:00 pm

You're getting the correct address from Google DNS for ftp.blazingcomet.com, but when you use your router's DNS you're getting a different (and presumably incorrect) address. So it looks like it's your router's DNS that's at fault. - caching an out of date address, perhaps.

	It is currently Thu May 23, 2013 12:20 am
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1076 - May 12 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

Blank Web Pages

Who is online