Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Data lost between two data log intervals

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Data lost between two data log intervals

Postby krimatic » Fri Mar 27, 2015 2:42 pm

Hello,
I've WS2307 and now is connected to station by wireless connection so data refresh is 128 sec. But today is windy weather so data refresh (according to manual) is 32 sec.
But I'm planning to connect outside sensors to station with cable connection and then refresh will be in 8 sec.

In Cumulus the shortest data log interval is 1 min so I wonder what's happening with data between every log interval. Is that mean that 7 measuring is lost and only one is recorded? Or cumulus calculate some mid-value. I'm specially interested about wind gust measurements.
Can I somehow get all data records from WS?

User avatar
steve
Cumulus Author
Posts: 26256
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: On tour in France
Contact:

Re: Data lost between two data log intervals

Postby steve » Fri Mar 27, 2015 8:12 pm

It logs the current value at the time the entry was logged. The other values are read and displayed and used for high/low data etc. If you want to permanently record every individual reading, you would have to devise some way of doing it yourself, e.g. using realtime.txt.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Re: Data lost between two data log intervals

Postby krimatic » Fri Mar 27, 2015 10:43 pm

steve wrote:It logs the current value at the time the entry was logged. The other values are read and displayed and used for high/low data etc. If you want to permanently record every individual reading, you would have to devise some way of doing it yourself, e.g. using realtime.txt.


Hi Steve, thanks for explanation.
At least I know I'll not lose some extreme values.

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Re: Data lost between two data log intervals

Postby krimatic » Sat Mar 28, 2015 10:49 pm

Is it anyhow possible to get history data inside same realtime.txt file? According to help it isn't :( Some changes of .ini file?

If I select option "FTP rename" I get multiple files but with same values, so I couldn't do anything with in Excel.
From my point of view one additional option missing, "create realtime.txt log"

CulusRealtime and WeatherConsole are nice, but do not provide any historical data

User avatar
PaulMy
Posts: 1549
Joined: Sun Sep 28, 2008 11:54 pm
Weather Station: Davis Vantage Pro 2 w/Envoy USB
Operating System: Windows-8
Location: Komoka, ON Canada
Contact:

Re: Data lost between two data log intervals

Postby PaulMy » Sun Mar 29, 2015 1:23 am

Is it anyhow possible to get history data inside same realtime.txt file? According to help it isn't :( Some changes of .ini file?
Are you looking for something different than what dayfile.txt provides (contains each day's max, min, etc.)?

Perhaps the realtimelog.txt file in Cumulus Toolbox is what you want (saves realtime.txt data at the interval of your choice).

Or save your data, dayfile.txt and/or monthlog.txt in a MySQL using http://wiki.sandaysoft.com/a/ImportCumulusFile

Paul

User avatar
steve
Cumulus Author
Posts: 26256
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: On tour in France
Contact:

Re: Data lost between two data log intervals

Postby steve » Sun Mar 29, 2015 8:16 am

...or create your own version of realtime.txt using web tags.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Re: Data lost between two data log intervals

Postby krimatic » Sun Mar 29, 2015 10:47 am

PaulMy wrote:
Is it anyhow possible to get history data inside same realtime.txt file? According to help it isn't :( Some changes of .ini file?
Are you looking for something different than what dayfile.txt provides (contains each day's max, min, etc.)?

Perhaps the realtimelog.txt file in Cumulus Toolbox is what you want (saves realtime.txt data at the interval of your choice).

Paul


What I like is a realtime.txt but not only with current (latest) value than as a log. Same info's which are in realtime.txt, nothing more or less. I need a file like mothlylog.txt, but with shorter interval than a minute
With that log (txt file) and Excel I could easy create very accurate reports for a weather history.
It seems to realtimelog.txt will meet my expectations (according to description)

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Re: Data lost between two data log intervals

Postby krimatic » Sun Mar 29, 2015 12:29 pm

What Paul recommended is what I need. It creates realtime log from realtime file. But one problem, Cumulus toolbox has minimum update frequency in minutes, Cumulus have possibility to make realtime.txt in seconds.
So, file I get is same as monthly.log.

How to get update in seconds (without any additional rules and anything else)?

User avatar
steve
Cumulus Author
Posts: 26256
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: On tour in France
Contact:

Re: Data lost between two data log intervals

Postby steve » Sun Mar 29, 2015 12:43 pm

Cumulus allows you to invoke a command at each realtime update. You could run a 'batch' file to perform the appending of the realtime.txt to a log. I'm pretty sure several people have done this before - a search on the forum and wiki may turn something up.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Re: Data lost between two data log intervals

Postby krimatic » Sun Mar 29, 2015 9:58 pm

Unfortunately I don't have any skills in writing batch files :( So I would appreciate any help.

That is something like this?
:start
copy /b realtime.log+realtime.txt realtime.tmp
tail --quiet --lines=1440 realtime.tmp > realtime.log
copy realtime.log Z:\casa\cumulus\realtimelog.txt
choice /C N /T 60 /D N /M "Wait for timeout..."
goto start

User avatar
steve
Cumulus Author
Posts: 26256
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: On tour in France
Contact:

Re: Data lost between two data log intervals

Postby steve » Mon Mar 30, 2015 7:08 am

Looking at the post in the forum that you've taken that from, that's what it appears to be intended to do, yes.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

krimatic
Posts: 14
Joined: Mon Mar 16, 2015 11:50 pm
Weather Station: WS2307
Operating System: Win7 x64
Location: Grizane, Croatia

Re: Data lost between two data log intervals

Postby krimatic » Mon Mar 30, 2015 10:31 pm

OK, thanks for reply, I'll try to do something.
But I still think that is very oddly that Cumulus Toolbox can produce realtimelog.txt in minimum interval of a one minute and Cumulus can produce realtime.txt in a interval in a seconds. I can't really understand why toolbox doesn't follow Cumulus possibilities.

User avatar
steve
Cumulus Author
Posts: 26256
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: On tour in France
Contact:

Re: Data lost between two data log intervals

Postby steve » Tue Mar 31, 2015 6:56 am

The Toolbox is a third party application which is no longer developed; perhaps it would have been an enhancement at some point, had it continued to be developed.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired


Return to “La Crosse”

Who is online

Users browsing this forum: No registered users and 3 guests