No longer get data downloaded from data logger
Posted: Tue 01 Dec 2009 6:23 pm
Hi I set up my WS2300 weather station from the 1st November and quickly converted on to Cumulus, which I found on the web. At some point during Nov when my PC goes down and I reboot, it has stopped down loading the missing data from the weather station. (This did work intially.)
I did have some rain anomalies in my data from when I was setting up and poured water into the rain gauge. I edited these out of the data, but I have no idea if this is when I picked up problems down loading the data logger data.
Everything else is ok. My station is connected to my on PC on serial cable not USB as I know this can cause problems. I've also seen some posts about data formats but I can't see anything wrong there. The Cumulus.ini does have datalogger set to 1. I note the ini file has a data format of 2009 whereas the data file has 09. I didn't think I had touched that!I have tried changing the ini to 09, but that's makes no difference so I've gone back to my original one.
Many thanks
Paul
I did have some rain anomalies in my data from when I was setting up and poured water into the rain gauge. I edited these out of the data, but I have no idea if this is when I picked up problems down loading the data logger data.
Everything else is ok. My station is connected to my on PC on serial cable not USB as I know this can cause problems. I've also seen some posts about data formats but I can't see anything wrong there. The Cumulus.ini does have datalogger set to 1. I note the ini file has a data format of 2009 whereas the data file has 09. I didn't think I had touched that!I have tried changing the ini to 09, but that's makes no difference so I've gone back to my original one.
Many thanks
Paul