Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Rain Collector Measurement
- geoffp
- Posts: 322
- Joined: Tue 28 Jun 2011 2:06 pm
- Weather Station: Oregon Scientific WMR 200
- Operating System: Windows 7
- Location: Harwich, Essex
- Contact:
Rain Collector Measurement
Any La Crosse owners know what 1 tip of the rain collector measures, I have the WS-2350 model
Regards,
Geoff
WOW Site No. 147808
Geoff
WOW Site No. 147808
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Rain Collector Measurement
It's 0.518 mm, inexplicably. It's not even the metric equivalent of a sensible imperial value: 0.02 in = 0.508 mm
Steve
- geoffp
- Posts: 322
- Joined: Tue 28 Jun 2011 2:06 pm
- Weather Station: Oregon Scientific WMR 200
- Operating System: Windows 7
- Location: Harwich, Essex
- Contact:
Re: Rain Collector Measurement
Hi Steve, Do I just put the 0.518 mm into the multiplier section?
Regards,
Geoff
WOW Site No. 147808
Geoff
WOW Site No. 147808
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Rain Collector Measurement
What do you want achieve by doing that? It would roughly halve your rain figures. The rain gauge tip size is not a logical figure to be using as a calibration multiplier - have you modified your gauge to make it tip with a different amount?
Steve
- geoffp
- Posts: 322
- Joined: Tue 28 Jun 2011 2:06 pm
- Weather Station: Oregon Scientific WMR 200
- Operating System: Windows 7
- Location: Harwich, Essex
- Contact:
Re: Rain Collector Measurement
Hi Steve, No, I have done no mods, it was just that after the last drop of rain we had the total seemed a bit low, that was why I asked what the one tip figure would be to try and get a more true figure
Regards,
Geoff
WOW Site No. 147808
Geoff
WOW Site No. 147808
- MickinMoulden
- Posts: 499
- Joined: Mon 20 Dec 2010 12:12 pm
- Weather Station: WS-1081 with rain gauge mod
- Operating System: Windows 7 & 1.9.3 b1059
- Location: Palmerston, NT, Australia
- Contact:
Re: Rain Collector Measurement
The tip measurement it makes is what it sends, and should be fine. This of course is only good if it is correct, and should be. But some are not Calibrated correctly or just not made fantastic. You could "guess" how much more it should be which sounds like what you are intending to do, but you'll end up more wrong than what the initial "error %" is (assuming there is one).
Best to get a good manual rain gauge. Do some comparisons over a few days of rain (fair amounts, not piddly .2mm/1.3mm etc), and find a good medium. With this "average" worked out, if there is a difference with the averages from your manual rain gauge to your weather station rain gauge, then it would be safe to put in a calibration multiplyer.
Then in the future your manual rain gauge can serve as a check to see that your WX rain gauge is still operating correctly. If you see changes, then it's time to check for spiders webs, leaves, rust, loose conections, water in conections, flat batteries etc.
Best to get a good manual rain gauge. Do some comparisons over a few days of rain (fair amounts, not piddly .2mm/1.3mm etc), and find a good medium. With this "average" worked out, if there is a difference with the averages from your manual rain gauge to your weather station rain gauge, then it would be safe to put in a calibration multiplyer.
Then in the future your manual rain gauge can serve as a check to see that your WX rain gauge is still operating correctly. If you see changes, then it's time to check for spiders webs, leaves, rust, loose conections, water in conections, flat batteries etc.
- geoffp
- Posts: 322
- Joined: Tue 28 Jun 2011 2:06 pm
- Weather Station: Oregon Scientific WMR 200
- Operating System: Windows 7
- Location: Harwich, Essex
- Contact:
Re: Rain Collector Measurement
Thanks for that Mike, I have a proper calibrated rain guage so will check it over the next few rainfalls
Regards,
Geoff
WOW Site No. 147808
Geoff
WOW Site No. 147808