Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

For discussion of DIY weather equipment - sensors, accessories, improvements to existing kit etc
WimT
Posts: 7
Joined: Wed Sep 07, 2016 8:24 pm
Weather Station: WH3080
Operating System: Raspberry B+, Noobs, CumulusMX
Location: Rijssen, Netherlands

Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby WimT » Wed Nov 09, 2016 10:46 pm

Dear readers,
At the moment i am searching for a solution for my Fineoffset weather station WH3080, this because of the returning USB-lockup in 2 sets WH3080 connected to raspberry-pi using USB-connection.
The 2 sets WH3080 are in use on different locations in the same city.

Maybe somebody can tell me and help me with the next questions, and give instructions to find and correct the several scripts. Of course I have searched the internet for this solution but could not find.

The solution to reset the Base-set WH3080 using a switch/hub and additional script is not ideal because of wrong pressure data after reset.

Is it possible to use a raspberry-pi and install and configurate for;
1) Install CumulusMX software and use data coming from RTLSDR dongle?
2) Using RTLSDR dongle and software for sniffering the WH3080 transmitter data?
3) Because of the missing data for pressure- and inside-temp, add a temp/pressure sensor on the Raspberry-pi.
4) Wich problems do i not recognise in these configuration?

There must be many people using Raspberry-pi in combination with WH3080 or other Fineoffsets, think several of them also suffering for the USB lockup issue.

The reason to do so;
The Raspberry-pi no longer need USB connection with WH3080
The RTLSDR dongle (R820T2 price €10,00 up to 25,95) and temp/pressure sensor (BMP180 € 10,95) not that expensive.
The raspberry-pi can be used as stand alone unit, using wifi or network cable to connect to router
The WH3080 Fineoffset transmitter and receiver are still working as normal set.

Like to read your response,
Kind regards, Wim

uncle_bob
Posts: 459
Joined: Wed Aug 17, 2011 2:58 pm
Weather Station: WeatherDuino Pro2
Operating System: 2008
Location: Canberra

Re: Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby uncle_bob » Wed Nov 09, 2016 11:21 pm

There's a few of us that dumped our FineOffset transmitters and receivers and replaced them with Werk_AG's WeatherDuino Pro2 system. This uses the rain and wind sensors from the FineOffSet but provides stability and accuracy of a Davis system but is more configurable than a Davis system. You can hook this up to the Pi running CumulusMX.

More information here: http://www.meteocercal.info/forum/Thread-What-is-the-WeatherDuino-Pro2

WimT
Posts: 7
Joined: Wed Sep 07, 2016 8:24 pm
Weather Station: WH3080
Operating System: Raspberry B+, Noobs, CumulusMX
Location: Rijssen, Netherlands

Re: Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby WimT » Thu Nov 10, 2016 10:33 am

Hi Uncle_bob,

Thanks for your reply.
This "weatherduino"solution is very drastic, and maybe the best way to get a reliable weather-set. (i keep this solution in my mind)

Maybe somebody can help to get the scripts working for my idea? (raspberry, cumulusmx, rtlsdr-dongle sniffing Fineoffset)
At least i want to try it, because several parts are in home now, it is just i can not get the scripts to work together ;)

So maybe some Raspberry-pi experts are triggered to help?

With kind regards,
Wim

User avatar
mcrossley
Posts: 5016
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Jessie Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby mcrossley » Thu Nov 10, 2016 11:55 am

If you search you will find several people have set up systems to receive FO transmissions directly. I played around using a Hope RFM module hooked up to rPi, I never got it working satisfactorily, primarily I think because my transmitter was an 868 MHz unit and most of the code/documentation I found was for the 433 MHz. FO also changed the encoding at some point.

There is a thread on this forum where people have played around in the past: viewtopic.php?t=4507 There is more info on the WX forum.

WimT
Posts: 7
Joined: Wed Sep 07, 2016 8:24 pm
Weather Station: WH3080
Operating System: Raspberry B+, Noobs, CumulusMX
Location: Rijssen, Netherlands

Re: Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby WimT » Thu Nov 10, 2016 9:27 pm

Thanks guys, your response give me much information, now i need some time to read. :)

Kind regards,
Wim

tumutbound
Posts: 155
Joined: Thu Mar 11, 2010 11:03 am
Weather Station: WH1081
Operating System: Linux, Raspberry Pi (Wheezy)
Location: Port Huon, Tasmania , Australia
Contact:

Re: Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby tumutbound » Fri Nov 11, 2016 9:25 am

On my ToDo list is to use a HopeRF receiver on a Raspberry Pi to intercept the FIne Offset data. Not at the top of the list though.

I have a couple of plugin boards from openenergymonitor.org that should help do the job.They contain an Atmel 328 and a Hoperf RFM128 so can run the Jeelabs RFM128 libraries. I have a link somewhere to the data format used in the FO transmissions.
One problem I have to to identify the transmitter of my weather station as it's not the only one nearby. Adding to the clutter are a number of beacons or data transmitters used locally in aquaculture - lots of salmon farms near me.
My weather
CumulusMX (3036)
Raspberry Pi: Wheezy
FineOffset WH1081

WimT
Posts: 7
Joined: Wed Sep 07, 2016 8:24 pm
Weather Station: WH3080
Operating System: Raspberry B+, Noobs, CumulusMX
Location: Rijssen, Netherlands

Re: Raspberry-pi, CumulusMX, RTLSDR-dongle, sniffing Fineoffset transmitter

Postby WimT » Fri Nov 11, 2016 10:02 pm

tumutbound wrote:On my ToDo list is to use a HopeRF receiver on a Raspberry Pi to intercept the FIne Offset data. Not at the top of the list though.

I have a couple of plugin boards from openenergymonitor.org that should help do the job.They contain an Atmel 328 and a Hoperf RFM128 so can run the Jeelabs RFM128 libraries. I have a link somewhere to the data format used in the FO transmissions.
One problem I have to to identify the transmitter of my weather station as it's not the only one nearby. Adding to the clutter are a number of beacons or data transmitters used locally in aquaculture - lots of salmon farms near me.


Hello Tumutbound,
Well, i only can give you the tip to use a homemade HB9CV to intercept your own FO transmitter, use vertical position ;) , for dimensions see
http://www.changpuak.ch/electronics/HB9CV.php , fill in your receive frequency.
Kind regards,
Wim


Return to “Homebuilt”

Who is online

Users browsing this forum: No registered users and 3 guests