I have both wireless and wired VP2 consoles, but only a wireless ISS. This has a phone-type RJ11 socket, marked COMMS, although the PCB is for the wireless unit. I connected the wired console and this wireless ISS together with 4-core phone cable, RJ11 plugs on each end, and expected to see the console display the data, but nothing happened. Is this setup impossible, or am I missing something? The wired ISS PCB is available (in the US) as a spare part, and its photo shows it has a battery connector and antenna connector, although for a wired system which won't use these parts. Are these two PCBs essentially the same? If so, can I adapt my current wireless ISS to connect with cable to my wired console? Thanks for any info.
I also need a used wired ISS PCB, or complete ISS if one available, and can do some soldering if necessary. Thanks.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki