I believe I've asked this before but didn't receive an answer. Tried messaging the developer -- also did not receive a response.
I would like to monitor the battery voltage on the Davis Console and though it shows the correct voltage when I edit the rule -- it never comes up with a message. the battery voltage shows as sic (4.31v) -- I put in a rule to notify when < 3.1 or 3.1v but neither appear to work.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Toolbox question
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Toolbox question
I don't think this will be possible, the tag value contains the 'v' character which means that the numeric comparison will probably fail. I think your only hope would be Steve adding a tag that contains just the numeric value.
-
- Posts: 24
- Joined: Fri 30 Dec 2011 11:20 pm
- Weather Station: Davis Vantage Pro
- Operating System: Windows XP
- Location: Pagosa Springs, CO
- Contact:
Re: Toolbox question
So, I suppose I could try "equals" and several selections of 3.1v, etc.
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Toolbox question
Depends how the comparison in toolbox works, if it is numeric it may still not work.
-
- Posts: 24
- Joined: Fri 30 Dec 2011 11:20 pm
- Weather Station: Davis Vantage Pro
- Operating System: Windows XP
- Location: Pagosa Springs, CO
- Contact:
Re: Toolbox question
FYI, that appears to work. "Equals" is case insensitive, text comparison.
So, I put in a couple of check points for the battery value.
when it hits 3.1, it usually fails shortly after.
So, I put in a couple of check points for the battery value.
when it hits 3.1, it usually fails shortly after.
-
- Posts: 220
- Joined: Tue 07 Feb 2012 9:42 am
- Weather Station: Davis Vantage PRO2
- Operating System: Windows 11 Pro 64 Bit
- Location: Camberley
Re: Toolbox question
Did you manage to get it working, if so how?
Thanks
Thanks