Sandaysoft

Hello Steve,

Get Cumulus build 1041 errors "Data input appears to have stopped - check your station and connections" while receiving data from weather station.

Regards,
Koos

Cumulus generates that message when it hasn't been able to read any valid data from the station for over a minute. This would also apply if it was getting bad data and discarding it. If you zip up the diags folder and attach it, I'll take a look.

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!

Hello Steve,

Your answer was reason for me to double check the equipment over here first.
After the error occurs, Cumulus did several restarts and I wouldn’t give you unnecessarily work to if it caused an malfunction in my own equipment.
When the error appears in the next few days I will zip that Diags folder and send it over to you.

Regards,
Koos

Hello Steve,

False alarm, no problems with mentioned error in Cumulus build 1041.
The fault was caused by an unstable wireless connection from an USB-Server I use
for data transport from the Fine Offset to the server where Cumulus is running.
Changed the configuration with an UTP-cable and the system is running perfectly now!

Regards,
Koos