You want each tip to count as 0.2 mm instead of 0.3 mm? Yes, you can do that, you would set a calibration value in Cumulus of 0.67, but are you sure your rain gauge is over-reading by that much? I think they normally under-read?morfeas2002 wrote:Ok, my mistake, i understand now.The station measures 0.3 mm and it can not be changed from the panel.
Is it possible to change it from cumulus to count 0.2 mm or it can`t be done?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Build 975 - Rain Threshold value
- steve
- Cumulus Author
- Posts: 26702
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Build 975 - Rain Threshold value
Steve
-
- Posts: 31
- Joined: Fri 30 Apr 2010 9:56 pm
- Weather Station: National Geographic 265 NE
- Operating System: Windows XP
- Location: Kalamata/Greece
- Contact:
Re: Build 975 - Rain Threshold value
I am not sure so i will leave it as it is.Thanks!!!
- steve
- Cumulus Author
- Posts: 26702
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Build 975 - Rain Threshold value
Probably best to do that, unless you have an accurate measurement from another gauge very close by to compare it with.morfeas2002 wrote:I am not sure so i will leave it as it is.Thanks!!!
Steve