Steve,
I see in the Gauges.js where you have code for the LCD displays, is there a way to tint the back ground for just the wind direction, or change the wind direction LCD text to a color to match the pointer?
Sometimes I forget which LCD is for which pointer, I know you have them marked above and below the windows but hard to read when the pointers are on top of the windows.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Tint Wind Direction LCD
Moderator: mcrossley
- mcrossley
- Posts: 12695
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Tint Wind Direction LCD
In the SteelSeries library, the LCD colour is set by the lcdColor parameter. For the Wind Direction gauge, there is only one colour setting for both LCD panels, so to change them independently you would have to hard code the colours into your copy of the library.
- K8POS
- Posts: 94
- Joined: Sat 03 Jan 2015 4:17 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 7
- Location: Thumb of Michigan
- Contact:
Re: Tint Wind Direction LCD
Mark,
Thanks, I will have a look and post the code if I am successful.
Bob
Thanks, I will have a look and post the code if I am successful.
Bob