Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

New Steelseries Gauges and Cumulus 1

Discussion of Mark Crossley's HTML5/Javascript gauges

Moderator: mcrossley

Mincek
Posts: 12
Joined: Mon Sep 25, 2017 7:51 am
Weather Station: wh1080
Operating System: win10/rapsberry pi 2

Re: New Steelseries Gauges and Cumulus 1

Postby Mincek » Wed Oct 04, 2017 5:07 am

Yes I Know that, but on the page, half of the pressure indicator is red.
look at http://www.wiatrkadyny.pl/new

Mincek
Posts: 12
Joined: Mon Sep 25, 2017 7:51 am
Weather Station: wh1080
Operating System: win10/rapsberry pi 2

Re: New Steelseries Gauges and Cumulus 1

Postby Mincek » Wed Oct 04, 2017 10:23 am

I just deleted sections, and areas in baro indicator, but can You tell me how to set sections in wind indicator ??

User avatar
mcrossley
Posts: 5017
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Jessie Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: New Steelseries Gauges and Cumulus 1

Postby mcrossley » Wed Oct 04, 2017 11:57 am

Mincek wrote:Yes I Know that, but on the page, half of the pressure indicator is red.
look at http://www.wiatrkadyny.pl/new

I'm not sure why your insisting on making the min value 960? Your data doesn't need that range. You have large red sectors because the you don't have much historic data, and you have never seen any really low pressure values yet. Once you have a decent low pass through, the sectors will shrink.

Meantime the fix is to go back to the default min pressure of 990 - that is why it is so high, to make to display look good for stations without much data, or regions that do not get much pressure variation. As you exceed the default min/max the gauge will auto-scale to accommodate the new range.

Mincek wrote:but can You tell me how to set sections in wind indicator ??

The gauge already has areas for average/max gust. Do you want sections on the scale area as well? Many of the other gauges have them...
Dynamic: ssGauge.setSection(<array of sections to display>)
Static: params.section = [<array of sections to display>]

Mincek
Posts: 12
Joined: Mon Sep 25, 2017 7:51 am
Weather Station: wh1080
Operating System: win10/rapsberry pi 2

Re: New Steelseries Gauges and Cumulus 1

Postby Mincek » Wed Oct 04, 2017 2:34 pm

"Ok i will manage with pressure indicator. Definitely you helped me with info thet there is still to little data. I do not understand though sections in wind indticator. Could you paste me sample code with exact colour for knots value? When there is no sections for wind indicator I do not know where to look for it and cannot try to change it. I would be very thankful for such sample.

Mincek
Posts: 12
Joined: Mon Sep 25, 2017 7:51 am
Weather Station: wh1080
Operating System: win10/rapsberry pi 2

Re: New Steelseries Gauges and Cumulus 1

Postby Mincek » Mon Oct 09, 2017 11:37 am

OK I have another problem.
Why in the indicator of wind direction sometimes is "area" like this:
Image

and sometimes is "sector", like this ??
Image

In this indicator i wanna only "area"

User avatar
mcrossley
Posts: 5017
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Jessie Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: New Steelseries Gauges and Cumulus 1

Postby mcrossley » Sun Oct 15, 2017 5:03 pm

The area shows the wind-rose data, the sector the direction variation over the last 10 minutes.
The settings - documented with comments - are respectively...
showWindVariation
showRoseOnDirGauge


Return to “SteelSeries Gauges”

Who is online

Users browsing this forum: No registered users and 2 guests