Page 1 of 1

now geting this

Posted: Sun Jul 08, 2018 7:03 pm
by dazza1223
hi im get the now i dont understand why

Re: now geting this

Posted: Sun Jul 08, 2018 8:22 pm
by Toxic17
I get this from time to time. not sure why though it always fixes itself.

Re: now geting this

Posted: Sun Jul 08, 2018 9:15 pm
by dazza1223
yh but i see other site and ive sate thay and watch them and thay dint give errors

Re: now geting this

Posted: Sun Jul 08, 2018 9:19 pm
by mcrossley
Look at the network trace in the browser dev tools and see what the contents of the realtimegauges.txt file looks like when the error occurs.

Re: now geting this

Posted: Sun Jul 08, 2018 9:29 pm
by dazza1223
ok ive got it set up now so i will watch it thanks

Re: now geting this

Posted: Sun Jul 08, 2018 10:01 pm
by dazza1223
hi i trace it and here is the out put


{"date":"11:nn",
"temp":"20.3",
"tempTL":"18.7",
"tempTH":"29.0",
"intemp":"28.6",
"dew":"13.5",
"dewpointTL":"12.7",
"dewpointTH":"18.0",
"apptemp":"21.4",
"apptempTL":"19.7",
"apptempTH":"29.4",
"wchill":"20.3",
"wchillTL":"18.7",
"heatindex":"20.3",
"heatindexTH":"28.8",
"humidex":"23.3",
"wlatest":"1.0",
"wspeed":"0.0",
"wgust":"1.0",
"wgustTM":"15.0",
"bearing":"78",
"avgbearing":"85",
"press":"1025.53",
"pressTL":"1022.72",
"pressTH":"1025.53",
"pressL":"968.98",
"pressH":"1044.84",
"rfall":"0.0",
"rrate":"0.0",
"rrateTM":"0.0",
"hum":"65",
"humTL":"40",
"humTH":"76",
"inhum":"48",
"SensorContactLost":"0",
"forecast":"Settled fine",
"tempunit":"C",
"windunit":"mph",
"pressunit":"hPa",
"rainunit":"mm",
"temptrend":"-0.6",
"TtempTL":"05:31",
"TtempTH":"13:14",
"TdewpointTL":"01:23",
"TdewpointTH":"15:09",
"TapptempTL":"04:51",
"TapptempTH":"13:48",
"TwchillTL":"05:31",
"TheatindexTH":"13:14",
"TrrateTM":"00:00",
"ThourlyrainTH":"00:00",
"LastRainTipISO":"2018-05-02 12:19",
"hourlyrainTH":"0.0",
"ThumTL":"12:57",
"ThumTH":"05:35",
"TpressTL":"00:00",
"TpressTH":"22:54",
"presstrendval":"0.30",
"Tbeaufort":"F2",
"TwgustTM":"08:13",
"windTM":"7.0",
"bearingTM":"35",
"timeUTC":"2018,0,8,10,0,37",
"BearingRangeFrom10":"070",
"BearingRangeTo10":"110",
"UV":"0.0",
"UVTH":"0.0",
"SolarRad":"0",
"SolarTM":"0",
"CurrentSolarMax":"0",
"domwinddir":"NE",
"WindRoseData":[0.0,0.0,0.0,20.0,61.0,60.0,7.0,88.0,24.0,125.0,149.0,13.0,0.0,0.0,0.0,0.0],
"windrun":"67.7",
"cloudbasevalue":"2780",
"cloudbaseunit":"ft",
"version":"3.0.0",
"build":"3043",
"ver":"12"}

Re: now geting this

Posted: Mon Jul 09, 2018 11:11 am
by mcrossley
Errmm...

Code: Select all

"date":"11:nn",


And...

Code: Select all

timeUTC":"2018,0,8,10,0,37",


The second being critical - month is set to zero.

Something is going awry with the date/time supplied.

Re: now geting this

Posted: Mon Jul 09, 2018 12:05 pm
by steve
Looks like a Cumulus 1 file being used with MX (wrong format strings).

Re: now geting this

Posted: Mon Jul 09, 2018 12:34 pm
by dazza1223
Errmm so it nothing ive done is it ? :D

Re: now geting this

Posted: Mon Jul 09, 2018 1:40 pm
by mcrossley
Well, are you using Cumulus MX? If so you need to use the MX version of the guages realtime file.

Re: now geting this

Posted: Mon Jul 09, 2018 1:51 pm
by dazza1223
yh mark i am and ok i re download that one thank you