get high monthly rain back on track?

[n9mfk]

Hi Steve, Is there a way to get this value back on track using c1 before running new build

This year's high monthly rain isn't read correctly from year.ini at startup, so gets reset to this month's figure - should be fixed in 3019

thahks Beau

[steve]

If you look at the NOAA annual report, you can check whether your January total is higher than February, and if it is, edit year.ini before starting Cumulus.

[n9mfk]

hi Steve do mean a mx noaa report or c1?
thanks Beau

[steve]

They should be the same.

[n9mfk]

i wet to make sure im look a this correctly

Code: Select all

                         Precipitation (in)

              Dep.   Max        Days of Rain
              From   Obs.           >=
 YR MO Total  Norm   Day Date 0.01 0.10 1.00
---------------------------------------------
 15  1  1.13 -0.69  0.55   3    12    4    0
 15  2  0.52 -1.29  0.38   1     7    1    0
---------------------------------------------
        1.65 -1.98  0.55  Jan   19    5    0

if i figure it correct it should be 1.65
beau

[steve]

I don't understand. What should be 1.65?

[n9mfk]

Steve what i was asking is should my the number in my year.ini be 1.65
or did i figure it wrong?
Beau

[steve]

The figure that's wrong is the high MONTHLY total for this year. In your case it should be 1.13 in January, but it is probably showing 0.52 in February. Edit the [Rain] section in year.ini; put 1.13 for MonthlyHigh and any date and time in January for HMonthlyTime.

[n9mfk]

Steve,
what I do not understand
is http://n9mfk.info/wxnoaaclimatereports. ... 2014&mo=01
shows 0.90
so how can it be 1.13 how would i find the date and time

[steve]

This year is 2015.

[n9mfk]

thanks Steve sorry about the wrong year