b3021MX stopped reading data from console

[BCJKiwi]

Data stopped this morning. I was not awake at the time!
All data flat lined and the interface showed last data red and the time at 05:23:59. The interface software was not running i.e. I do not leave a browser open on the interface.
There is no evidence of any power glitches and MX is running in a notebook connected to the mains and with battery installed.
Did not touch the console but re-started MX and it is reading the console again.

Code: Select all

2015-03-23 05:23:59.818 Loop2: 4C-4F-4F-EC-01-FF-7F-9A-75-FA-02-34-46-02-00-FF-63-00-00-00-01-00-01-00-5D-00-FF-7F-FF-7F-38-00-FF-5D-FF-3A-00-3A-00-FF-7F-00-00-FF-FF-7F-00-00-FF-FF-00-00-00-00-00-00-00-00-00-00-02-00-00-D2-FF-C8-74-C8-74-9D-75-FF-03-06-0F-0F-04-0D-09-17-06-03-03-FF-7F-FF-7F-FF-7F-FF-7F-FF-7F-FF-7F-0A-0D-CC-7E
2015-03-23 05:23:59.818 10-min gust from loop2: 2
2015-03-23 05:24:00.535 Reading reception stats
2015-03-23 05:24:00.847 0A-0D-4F-4B-0A-0D-31-39-33-35-20-30-20-30-20-31-39-33-35-20-32-0A-0D-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
2015-03-23 05:24:00.847 1935 0 0 1935 2

2015-03-23 05:25:00.112 Writing log entry for 23/03/2015 5:25:00 a.m.
2015-03-23 05:25:00.112 max gust: 2
2015-03-23 05:25:00.112 Written log entry for 23/03/2015 5:25:00 a.m.
2015-03-23 05:25:00.112 Writing today.ini, LastUpdateTime = 23/03/2015 5:25:00 a.m. raindaystart = 38 rain counter = 38
2015-03-23 05:30:00.287 Writing log entry for 23/03/2015 5:30:00 a.m.
2015-03-23 05:30:00.287 max gust: 2
2015-03-23 05:30:00.287 Written log entry for 23/03/2015 5:30:00 a.m.
2015-03-23 05:30:00.303 Writing today.ini, LastUpdateTime = 23/03/2015 5:30:00 a.m. raindaystart = 38 rain counter = 38
2015-03-23 05:30:00.365 Creating standard HTML files
2015-03-23 05:30:00.365 Done creating standard HTML files
2015-03-23 05:30:00.365 Creating graph data files
2015-03-23 05:30:00.474 Done creating graph data files
2015-03-23 05:30:00.474 Creating extra files
2015-03-23 05:30:01.020 Done creating extra files
2015-03-23 05:30:01.254 Uploading extra files
2015-03-23 05:30:13.812 Done uploading extra files
2015-03-23 05:30:13.812 Uploading graph data files
2015-03-23 05:30:22.486 Done uploading graph data files
2015-03-23 05:35:00.493 Writing log entry for 23/03/2015 5:35:00 a.m.
2015-03-23 05:35:00.493 max gust: 2
2015-03-23 05:35:00.493 Written log entry for 23/03/2015 5:35:00 a.m.
2015-03-23 05:35:00.509 Writing today.ini, LastUpdateTime = 23/03/2015 5:35:00 a.m. raindaystart = 38 rain counter = 38
2015-03-23 05:40:00.825 Writing log entry for 23/03/2015 5:40:00 a.m.

It continued on like this until restarted not reading anymore loop data. On re-start, the new log shows a normal start up and archive data being read however none of this archive data has made it into the charts - can't really tell if it made it anywhere else either - in the interface or the website.

Code: Select all

2015-03-23 09:32:56.873 Start reading archive data
2015-03-23 09:32:56.873 Reading archive data
2015-03-23 09:32:56.873 Loading last N hour data from data logs: 23/03/2015 9:30:00 a.m.
2015-03-23 09:32:57.107 Loaded 13 entries to last hour data list
2015-03-23 09:32:57.357 Loaded 37 entries to last 3 hour data list
2015-03-23 09:32:57.607 Loaded 289 entries to last 24 hour data list
2015-03-23 09:32:58.028 Loaded 2017 entries to recent data list
2015-03-23 09:32:58.043 Get Archive Data

[steve]

There are already threads about this. I'm investigating.

[mcrossley]

It continued on like this until restarted not reading anymore loop data. On re-start, the new log shows a normal start up and archive data being read however none of this archive data has made it into the charts - can't really tell if it made it anywhere else either - in the interface or the website.

Did you wind back the last read date/time in today.ini to the point that data stopped before restarting Cumulus? And also delete the corresponding entries from the monthly log file?

[BCJKiwi]

No, it is only the test data/station.