Installation auf raspberry

[bajowar]

These are the pages yesterday, this month, and this year. When calling my weather station you can easily see this. The zip file of yesterday I attached in the appendix.

20170225-034244.zip

[steve]

You are using Mono 3.2.8 with a locale which uses commas for decimals (German). As mentioned in the instructions and the MX FAQ, and as I keep posting in the forum, Mono 3.2.8 does not work with locales which uses commas for decimals.

[rogerthn]

I am running CumulusMX and mono 3.2.8 with Swedish locale.
The trick might be that I have en_GB.UTF-8 as default "locale" but sv_SE.UTF-8 is installed?

Code: Select all

sudo raspi-config
4 Internationalisation Options
I1 Change Locale
[*] en_GB.UTF-8 UTF-8
[*] sv_SE.UTF-8 UTF-8
OK
Default locale for the system environment:
en_GB.UTF-8
OK

Starting CumulusMX

Code: Select all

cd /home/pi/CumulusMX
sudo mono CumulusMX.exe -lang sv-SE

[ConligWX]

Just for your Information,

I am running Mono 4.8.0.495 on my Debian Intel NUC with CumulusMX - this is with my Davis Vantage Pro2+ though some Fine Offsets apparently do not work with newer versions.

[bajowar]

How can I change locale German to Locale English in CumulusMX? Or do I have to do this with Raspberry?

[jank]

How can I change locale German to Locale English in CumulusMX? Or do I have to do this with Raspberry?

Hello Dieter

I am running: System Locale: de_DE.UTF-8 - CumulusMX Language: German
(please use my start/stop script with option -s (status). It makes it easy to find out, which locale you are using on your system and CumulusMX.
As far as I remember, CumulusMX will use the same locale as the system local.
However, you are able to use system local German, but CumulusMX Local english.
'This can be set via start command ---> sudo mono CumulusMX.exe -lang en-GB
Alternatively, if you are using my Start/Stop script, you can define the locale in the cumulusmxsh.conf file

# Normally CumulusMX language settings are equal System language. In case you want to use a different Language for system and CumulusMX
# use this parameter to start CumulusMX with different language. Refer to https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=12908 - Important note about locales
# Example: MXLANGUAGE="-lang de-DE" (Default = "")
MXLANGUAGE=""


the above would be option 1
Option 2, and this is what I did, I replaced all commas with dots in all ini files in the data folder
example: month201701.ini ----> Windrun=95.9752209624138

Replacing commans with dots should not be a big problem when using search and replace with a good texteditor like Notepad++ or similar.
#
Also here, my Start/Stop script can help you when called with option -c (check) This will check some basic environments in Cumulus....in your case, if files contain comma's

Jan

[rogerthn]

How can I change locale German to Locale English in CumulusMX? Or do I have to do this with Raspberry?

On the Raspberry I have English as default but Swedish is installed, please read my post again if you would like to keep mono 3.2.8.
Replace all of my sv_SE with de-DE.

[bajowar]

Please see my weather page "http://engelrod.com/wetterbericht". The pointers for temperature and dew point change continuously and display completely incorrect values. The software was not changed, the error occurred suddenly without interference from the outside.

[bajowar]

I have now updated an update. The error is now in the display "rainfall". The pointer counts every 5 seconds from 0 to 635. When I stop Cumulus, the error is still present on the weather side. There must probably be uploaded something wrong with the FTP upload. What do I have to do?

[steve]

Correct your rainfall total for today using the editor in Cumulus.

[bajowar]

Thank you Steve, surely you can also tell me where I find this file?

[steve]

It's not a file, it's on one of the menus in the MX browser interface. But it only edits today's rain. To edit your monthly/annual total now, you will need to edit the daily totals in dayfile.txt - there is more information about this in the main FAQ and the wiki.

[bajowar]

"To edit your monthly or annual total dayfile.txt - there is more about this in the main FAQ and the wiki."

Where can I find the "main FAQ" and the "wiki". A guide to editing the ini files monthly / annual would help.

[steve]

There are links at the top right of the forum (and also in the post that you are asked to read before posting in the forum - linked to in the pink 'news' box near the top of the forum).

[bajowar]

Hello Steve,
Thanks for your quick reply. I should have seen that, I'm sorry.