Sorry for the probably stupid Pi3 newbie question.
I have a WMR100 weather station that has been running for years on Windows.
I am moving to Pi3. Tired of all the windows updates causing me grief.
I cannot seem to figure out what to put in for the port in Cumulus setup.
I ran the following command: dmesg after plugging in the WMR100 to a USB port on the Pi3
I received the following:
[71744.297913] usb 1-1.4: new low-speed USB device number 9 using dwc_otg
[71744.442324] usb 1-1.4: New USB device found, idVendor=0fde, idProduct=ca01
[71744.442332] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[71744.442336] usb 1-1.4: Product: Universal Bridge
[71744.448823] hid-generic 0003:0FDE:CA01.0004: hiddev0,hidraw0: USB HID v1.10 Device [Universal Bridge] on usb-3f980000.usb-1.4/input0
What should I put in the Comport setting for Cumulus? I looked at the FAQ but there is no /dev/tty/USBX retrieved from the above command.
Any help would be greatly appreciated.
Thanks in advanced.
Ron
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Please help. Comport for CumulusMX on Pi3
Moderator: mcrossley
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Please help. Comport for CumulusMX on Pi3
You don't need a com port for a WMR100 as it's a USB device. If you have the required packages installed as described in the instructions, Cumulus will automatically detect the device.
Steve
-
- Posts: 2
- Joined: Fri 16 Jun 2017 11:18 pm
- Weather Station: wmr100
- Operating System: raspberrypi
Re: Please help. Comport for CumulusMX on Pi3
Steve:
After re-reading the post it appears I missed the library libudev.so.0
Thanks
Ron
After re-reading the post it appears I missed the library libudev.so.0
Thanks
Ron