Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4017) - 17 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Rainfall continually counts after rain stopped

Topics about the Beta trials up to Build 3043, the last build by Cumulus's founder Steve Loft. It was by this time way out of Beta but Steve wanted to keep it that way until he made a decision on his and Cumulus's future.

Moderator: mcrossley

Locked
Jonathan Jefferies
Posts: 25
Joined: Fri 22 Apr 2016 5:38 pm
Weather Station: Instromet
Operating System: Raspberry pi
Location: Northamptonshire

Rainfall continually counts after rain stopped

Post by Jonathan Jefferies »

Hi
I have an Instromet weather station and i have renewed the rain gauge wiring and sensor twice now as when it rains cumulus records the rainfall, but when the rain stops cumulus keeps counting sometimes as high as 839mm of rain. Im guessing there may be something wrong with cumulus and if so what could it be?

I have to remotely access the raspberry pi to alter the readings which is time consuming. When i alter the readings should i enter 0 or 0.0 for rainfall.

Many thanks
Check out raundsweather.co.uk my weather website
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Rainfall continually counts after rain stopped

Post by steve »

When it starts happening again, turn on debug logging, then after it's been happening for a few minutes, zip up the diags folder and attach it here, together with the debug.log file. Please indicate at what time it stopped raining.

It doesn't matter whether you use 0 or 0.0 to set the rain to zero.

Edit: You mention a Raspberry Pi, does this mean you are using MX rather than Cumulus 1 (which is the section where you have posted)? My instructions above don't apply in that case.
Steve
Jonathan Jefferies
Posts: 25
Joined: Fri 22 Apr 2016 5:38 pm
Weather Station: Instromet
Operating System: Raspberry pi
Location: Northamptonshire

Re: Rainfall continually counts after rain stopped

Post by Jonathan Jefferies »

Hi Steve

Many thanks for your reply.

Yes im using cumulus mx

Thanks
Check out raundsweather.co.uk my weather website
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Rainfall continually counts after rain stopped

Post by steve »

In that case, when it happens, turn on debug logging and data logging in the MX settings, wait for a few minutes while the rain is still increasing in Cumulus, and then zip up and attach to a reply in this thread the latest MXdiags file.


(Thread moved to MX section)
Steve
Jonathan Jefferies
Posts: 25
Joined: Fri 22 Apr 2016 5:38 pm
Weather Station: Instromet
Operating System: Raspberry pi
Location: Northamptonshire

Re: Rainfall continually counts after rain stopped

Post by Jonathan Jefferies »

Steve

Ive looked at questions regarding the diags folder and how to attach and not sure how to do it still, do i have to access the pi.

Thanks
Check out raundsweather.co.uk my weather website
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Rainfall continually counts after rain stopped

Post by steve »

Yes, you'll need to access the filestore on the Pi. The easiest way is probably to copy the file to your PC. It depends on how you have the Pi set up.
Steve
Jonathan Jefferies
Posts: 25
Joined: Fri 22 Apr 2016 5:38 pm
Weather Station: Instromet
Operating System: Raspberry pi
Location: Northamptonshire

Re: Rainfall continually counts after rain stopped

Post by Jonathan Jefferies »

What command do i have to input

I know how to input things like

sudo nano today.ini

But not sure how to access the diags folder.

Many thanks
Check out raundsweather.co.uk my weather website
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Rainfall continually counts after rain stopped

Post by steve »

The MXdiags directory is inside the directory where you have MX installed. I need the latest file from that directory; the file names are timestamps so it's easy to see which is the latest one.

How you get that file to the forum depends on how you have your Pi set up. You must have a way of copying files to and from it, as you put MX on there in the first place. The way I used to get files to and from my Pi was to set up a Samba share on the Pi, so it appeared as a network drive in Windows.
Steve
Jonathan Jefferies
Posts: 25
Joined: Fri 22 Apr 2016 5:38 pm
Weather Station: Instromet
Operating System: Raspberry pi
Location: Northamptonshire

Re: Rainfall continually counts after rain stopped

Post by Jonathan Jefferies »

Hi Steve

I attach the diags folder zip file, hope you receive it. I started the datalogging and debug logging around 19.00 yesterday 11th July. This is when it stopped raining and the readings increased even though no rain.

Hope you can find the problem.

Thanks
You do not have the required permissions to view the files attached to this post.
Check out raundsweather.co.uk my weather website
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Rainfall continually counts after rain stopped

Post by steve »

There's something wrong with your station. Here are the logger entries that Cumulus received when you started it up at 19:10 yesterday:

rdlg,101425,1,300,17:31:58,11/07/2017,13.6,13.9,13.7,14.0,14.7,14.1,88.7,90.3,89.3,979.1,979.3,979.1,0.0,0.7,0.0,246,94.84,653.60,233
rdlg,101426,1,300,17:36:56,11/07/2017,13.7,13.9,13.7,14.5,14.9,14.7,87.7,90.3,89.2,979.1,979.2,979.1,0.0,0.0,0.0,246,94.84,34.63,21
rdlg,101427,1,300,17:41:54,11/07/2017,13.7,13.9,13.7,14.4,14.8,14.5,87.2,89.4,88.5,979.1,979.2,979.1,0.0,1.6,0.2,247,94.84,71.11,20
rdlg,101428,1,300,17:46:52,11/07/2017,13.6,13.9,13.7,13.9,14.5,14.1,86.1,89.0,87.2,979.0,979.1,979.0,0.0,1.4,0.3,247,94.84,107.48,232
rdlg,101429,1,300,17:51:50,11/07/2017,13.5,13.7,13.6,13.5,14.1,13.7,85.6,87.4,86.4,979.0,979.2,979.0,0.0,1.2,0.1,247,94.84,143.92,241
rdlg,101430,1,300,17:56:48,11/07/2017,13.5,13.7,13.6,13.5,13.8,13.6,86.3,87.9,87.2,978.9,979.0,978.9,0.0,0.0,0.0,248,94.84,180.40,225
rdlg,101431,1,300,18:01:46,11/07/2017,13.5,13.7,13.5,13.4,13.8,13.6,86.6,87.7,87.0,979.0,979.1,979.0,0.0,0.0,0.0,247,94.84,216.83,247
rdlg,101432,1,300,18:06:44,11/07/2017,13.4,13.6,13.5,13.1,13.9,13.5,85.5,87.3,86.4,978.9,979.1,979.0,0.0,1.8,0.6,210,94.84,253.24,242
rdlg,101433,1,300,18:11:42,11/07/2017,13.3,13.6,13.4,13.0,13.6,13.2,86.1,87.8,87.1,979.1,979.2,979.1,0.0,1.8,0.4,217,94.84,289.75,241
rdlg,101434,1,300,18:16:40,11/07/2017,13.0,13.4,13.1,13.1,13.5,13.2,86.1,88.1,87.3,979.1,979.2,979.1,0.0,1.2,0.0,217,94.84,326.37,13
rdlg,101435,1,300,18:21:38,11/07/2017,13.0,13.2,13.0,13.3,13.7,13.4,87.7,89.2,88.5,979.1,979.2,979.1,0.0,1.6,0.7,226,94.84,362.98,232
rdlg,101436,1,300,18:26:36,11/07/2017,13.0,13.3,13.1,13.6,14.0,13.8,88.7,89.5,88.9,978.9,979.2,979.0,0.0,1.4,0.3,225,94.84,399.62,217
rdlg,101437,1,300,18:31:34,11/07/2017,13.1,13.3,13.2,13.8,14.3,14.0,88.5,89.8,89.1,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,436.09,237
rdlg,101438,1,300,18:36:32,11/07/2017,13.2,13.4,13.3,13.5,14.1,13.7,89.0,90.0,89.5,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,472.30,251
rdlg,101439,1,300,18:41:30,11/07/2017,13.3,13.4,13.3,13.5,14.2,13.8,88.7,89.8,89.2,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,508.45,228
rdlg,101440,1,300,18:46:28,11/07/2017,13.3,13.5,13.3,13.3,13.6,13.4,88.5,89.6,89.1,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,544.69,225
rdlg,101441,1,300,18:51:26,11/07/2017,13.2,13.5,13.3,13.5,13.9,13.7,86.7,88.7,87.5,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,580.94,223
rdlg,101442,1,300,18:56:24,11/07/2017,13.1,13.3,13.2,13.3,13.8,13.5,86.6,87.7,87.1,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,617.30,243
rdlg,101443,1,300,19:01:22,11/07/2017,13.0,13.3,13.1,13.2,13.5,13.3,87.2,88.4,87.8,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,653.62,254
rdlg,101444,1,300,19:06:20,11/07/2017,13.1,13.3,13.1,13.0,13.5,13.2,87.3,88.5,88.0,978.9,979.0,978.9,0.0,0.0,0.0,225,94.84,34.36,55

I've highlighted the rainfall counter in red. As you can see, it starts off at 653.60 in the first entry, it then drops to 34.63 (it is supposed to be an ever-increasing counter of the total rainfall) and then increases rapidly back up to 653.62, before suddenly dropping to 34.63 again.
Steve
Jonathan Jefferies
Posts: 25
Joined: Fri 22 Apr 2016 5:38 pm
Weather Station: Instromet
Operating System: Raspberry pi
Location: Northamptonshire

Re: Rainfall continually counts after rain stopped

Post by Jonathan Jefferies »

Steve

Thank you for the info. So cumulus is not at fault but my Instromet station. If so that's strange as i have replaced the datalogger, new pcb and rain gauge wiring and sensor, 3rd one now.
Check out raundsweather.co.uk my weather website
Locked