Hello,
I had problems with a corrupted SD-Card of my raspi, so I had reinstall rasbian including CumulusMX. I used the folder of the old setup from which I made a backup including the configfiles. Everything works fine again, but when I go on http://raspberrypi:8998 the Steel series Gauges are not working, neither on the Dashboard nor on the gauges page. The values are displayed as usual. Is there something missing?
Thanks in advance.
Martin
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
[Solved] Gauges do not work
Moderator: mcrossley
-
- Posts: 33
- Joined: Mon 07 Aug 2017 12:15 pm
- Weather Station: WH1080
- Operating System: Raspbian Jessie
[Solved] Gauges do not work
Last edited by maddinthebrain on Thu 14 Sep 2017 8:16 pm, edited 1 time in total.
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Gauges do not work
Certainly sounds like it!
I'd copy the contents of the "interface" folder in CMX zip over the contents of the on your pi as a starter.
I'd copy the contents of the "interface" folder in CMX zip over the contents of the on your pi as a starter.
-
- Posts: 33
- Joined: Mon 07 Aug 2017 12:15 pm
- Weather Station: WH1080
- Operating System: Raspbian Jessie
Re: Gauges do not work
That was it, thank you!