Page 1 of 2

Error "error [object Object]"

Posted: Sun 24 Sep 2017 6:18 am
by JMGSE
I got this error
error [object Object] on the settings page "station settings" if I want to save all other work
Wbr
Jörg

Re: Error "error [object Object]"

Posted: Sun 24 Sep 2017 12:05 pm
by JMGSE
I have set up cumulusmx with a new download same result.
I have set clock and date to act. date/time. same error.
Have got a screendump see in attachment
Yesterday before I have setup raspberry new it has worked particular

HELP
WBR
Jörg

Re: Error "error [object Object]"

Posted: Sun 24 Sep 2017 4:56 pm
by steve
It may be because of the non-ASCII characters in your description field.

Re: Error "error [object Object]"

Posted: Sun 24 Sep 2017 6:24 pm
by JMGSE
Hello Steve
Very sad. But it don´t change anything if I change characters with ASCII .
WBR
Jörg

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 1:04 pm
by steve
It may be one of the other settings. What version of Mono are you using, and what regional setting?

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 1:22 pm
by JMGSE
Hello Steve
Is it possible to enter the data by hand without interface so I don´t get the error ?
T.ex. Cumulus.ini ?
Thanks for help
WBR
Jörg

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 1:58 pm
by ConligWX
com port name perhaps?

COM0????

mine is like so:

/dev/ttyUSB0

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 3:21 pm
by steve
Yes, you should be able to edit Cumulus.ini while Cumulus is stopped.

Are there any error messages in the MXdiags file at the time you attempt to update the settings?

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 6:22 pm
by JMGSE
@ Toxic17
I have proof it, but without effect
@ Steve
I got an very short error message
Ashampoo_Snap_2017.09.25_20h16m34s_001_.png
you see.
All other seams works only this is not working.
Do you have an instruction with witch parameters i must fill it ?
I have a fine offset
and how must I lay in coordinates ? with , between or ; or nothing ?
WBR
Jörg

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 6:48 pm
by JMGSE
After I have edit cumulus.ini I got following message
Ashampoo_Snap_2017.09.25_20h37m12s_002_.png
But the gaugeside appear without data
Ashampoo_Snap_2017.09.25_20h42m25s_004_.png

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 6:51 pm
by JMGSE
Here a screenshot of cumulus.ini
Ashampoo_Snap_2017.09.25_20h39m15s_003_.png

Re: Error "error [object Object]"

Posted: Mon 25 Sep 2017 8:13 pm
by ConligWX
Your Cumulus.ini shows Comportname=/dev/ttyUSB0

but your screen shot of settings showed COM0 ?

please ZIP your MXDiags folder up and post the zip file here. we can then help you better in diagnosing the issue.

Re: Error "error [object Object]"

Posted: Tue 26 Sep 2017 6:43 am
by JMGSE
Hello Toxic17
I have changed it after you have wrote it. The weatherstation has contact with CumulusMX. I can see it in the history and today side.
Ashampoo_Snap_2017.09.26_08h40m38s_002_.png
But they are not show on the dashboard.
Ashampoo_Snap_2017.09.26_08h42m01s_003_.png
Then I have seen the data are still not send till weatherunderground

WBR
Jörg

Re: Error "error [object Object]"

Posted: Tue 26 Sep 2017 7:45 am
by JMGSE
Here is the MXdiag
MXdiags.zip
WBR
Jörg

Re: Error "error [object Object]"

Posted: Tue 26 Sep 2017 8:59 am
by steve
If your dashboard, gauges, and now pages are not working, but the others are, you need to look at the MX FAQ post, where that problem is mentioned. Note that your original problem is also mentioned, you are using Mono 3.2.8 which doesn't work with commas for decimal separators.

You should turn off the realtimegauges setting in Cumulus if you're not uploading to your own web site, I turned it on by default in the latest build.