Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
PressOffset
Moderator: mcrossley
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: PressOffset
Yes, I can see that from the files you uploaded. Perhaps the USB interface on your console has locked up - a common problem with Fine Offset stations. Presumably you are you using the ‘synchronise’ setting but this hasn’t helped? All I can suggest is the same as always, that you reset your console.
Steve
-
- Posts: 78
- Joined: Thu 06 Oct 2016 7:16 pm
- Weather Station: Maplin N96FY
- Operating System: Raspbian
Re: PressOffset
After restarting Cumulus again it connected to the station and the pressure value is correct.
-
- Posts: 78
- Joined: Thu 06 Oct 2016 7:16 pm
- Weather Station: Maplin N96FY
- Operating System: Raspbian
Re: PressOffset
I restarted Cumulus again and it connected to the station. Now the pressure values are correct.
-
- Posts: 78
- Joined: Thu 06 Oct 2016 7:16 pm
- Weather Station: Maplin N96FY
- Operating System: Raspbian
Re: PressOffset
Now the temperature trend graph is empty. If I delete tempdata.json on the site and update it from Cumulus to the site I can see the respective temperature graph but only for a while. The other trend graphs are from December 2. The file ftplog.txt has 307MB, the only date that it has is 2016-11-01 and it hasn't tempdata.json. I know that Cumulus has some difficulty to upload the files but it must have some other thing wrong.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: PressOffset
The tempdata.json file that you delete, is it zero length?
Delete the ftplog.txt file and then turn on ftp logging.
Delete the ftplog.txt file and then turn on ftp logging.
Steve
-
- Posts: 78
- Joined: Thu 06 Oct 2016 7:16 pm
- Weather Station: Maplin N96FY
- Operating System: Raspbian
Re: PressOffset
The file temdata.json was not emty. I deleted the file ftplog.txt in Cumulusmx because I didn't find it in the site. As I didn't find a way to logging ftp in dashboard and I have logging=1 in [ftp site] of Cumulus.ini, I rebooted Cumulus.
-
- Posts: 78
- Joined: Thu 06 Oct 2016 7:16 pm
- Weather Station: Maplin N96FY
- Operating System: Raspbian
Re: PressOffset
Now I can see the temperature trend graph updated!