Hello everybody,
I have a Fineoffset WH1080 connected to a Raspi3 with Raspian.
First I ran CumulusMX under Jessie and mono 4.0.2.5, but now I update to Stretch due to imcompatibilities of PHP7.0 which I need for other stuff. Doing the upgrade to Stretch mono was upgraded to 4.6.2.7. And now CumulusMX will not start anymore. Does anybody know a way for Cumulus and Stretch?
Thx in advance.
Martin
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
WH1080 raspbian stretch?
Moderator: mcrossley
-
- Posts: 33
- Joined: Mon 07 Aug 2017 12:15 pm
- Weather Station: WH1080
- Operating System: Raspbian Jessie
- ConligWX
- Posts: 1573
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: WH1080 raspbian stretch?
there are numerous post on Mono/Stretch issues here. you must run Mono 4.0.x OR LOWER with stretch with a fine offset Weather station. running it with a higher version of mono will not work with your Station.
you will need to remove Mono totally, then change the source for mono to a compatible version (3.2.8-4.0.2.5) in /etc/apt/sources.list save the .list file and then reinstall Mono again.
Plenty of guides to do this on the net.
you will need to remove Mono totally, then change the source for mono to a compatible version (3.2.8-4.0.2.5) in /etc/apt/sources.list save the .list file and then reinstall Mono again.
Plenty of guides to do this on the net.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir •