After months of my favourite weather station software getting less and less reliable and not finding an answer, I decided it was time to leave Cumulus 1.9 & take the plunge with MX or find something else. Well, it has been an up and down week as I move the data from June 2009 to MX followed by restoring my website and finally getting the webcam working again. Fingers crossed I seem to have managed it. I had considerable difficulties with the webcam and IP addresses, with the browser interface stubbornly losing contact with its data for long periods a couple 'agonising' of times.
However, I managed (not always sure how exactly) to solve most of the glitches, and it has to be said the Cumulus Console has worked a treat all the way through. It has not once lost contact with the weather station or mangled the data since it took over from Cumulus 1.9.
All I have to do now is to hunt down some rogue record readings and work out how one edits the Dayfile.text file and the records. You used to be able to do that within Cumulus 1.9, but I can't find that feature in the current interface.
http://www.winterman.org.uk/weather/
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024
Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Updating from Cumulus 1 to CumulusMX
Moderator: mcrossley
-
- Posts: 1183
- Joined: Fri 27 Jul 2012 11:29 am
- Weather Station: Chas O, Maplin N96FY, N25FR
- Operating System: rPi 3B+ with Buster (full)
Re: Updating from Cumulus 1 to CumulusMX
Cumulux MX does not have log file editor. The Wiki FAQ does give lots of guidance re rogue values, otherwise see exchanges in other topics on this forum.
-
- Posts: 0
- Joined: Sat 19 Sep 2015 8:03 am
- Weather Station: Davis Vantage Pro2 Plus
- Operating System: Windows 7 64bit
- Location: Finspång / Sweden
Re: Updating from Cumulus 1 to CumulusMX
Hello geoffw!
Can you help me out with info about what i need to change when going from Cumulus 1 to CumulusMX,
I do not understand witch files i need to edit and so on, i can read from cumulus wiki page that some need to be changed.
"If you use non-English settings, comma decimals etc, you will experience problems on Linux/OS X with Mono version 3.2.8 (e.g. on Raspberry Pi). But see the item further down about incompatible Mono versions
If you want to use your Cumulus 1 data with MX, and you use decimal commas, you will need to edit the .ini files to change the decimal commas into periods/full stops. The other data files will be OK.
If you are trying to use your Cumulus.ini file from Cumulus 1, you will need to make sure it doesn't contain any non-ASCII characters"
But witch files is needed to be edit and what dates??
Can you help me out with info about what i need to change when going from Cumulus 1 to CumulusMX,
I do not understand witch files i need to edit and so on, i can read from cumulus wiki page that some need to be changed.
"If you use non-English settings, comma decimals etc, you will experience problems on Linux/OS X with Mono version 3.2.8 (e.g. on Raspberry Pi). But see the item further down about incompatible Mono versions
If you want to use your Cumulus 1 data with MX, and you use decimal commas, you will need to edit the .ini files to change the decimal commas into periods/full stops. The other data files will be OK.
If you are trying to use your Cumulus.ini file from Cumulus 1, you will need to make sure it doesn't contain any non-ASCII characters"
But witch files is needed to be edit and what dates??