FTP issue
Posted: Wed 25 Apr 2018 11:48 pm
Hello everyone
I am using lately CumulusMX on a raspberry pi 2 Model B. Everything seems to be working in order except some ftp issues. To be more specific. I use ftp to upload data to another Raspberry pi on my local network which serves as a Web Server. The only file that seems to be uploaded successfully is realtime.txt. All others from "/web" folder as you can see in the diagnostic file attached, say that cannot be created. Another clue from the ftplog.txt file is these messages (for every single file not uploaded) " Could not get file size" and "Could not create file".
I have checked file permissions on both ftp servers although I use /home/user folder which the user can use with read/write permissions and all seems fine. Finally I used a Windows ftp client with the same credentials like Cumulus MX and it is working fine as well.
Any suggestions /ideas why CumulusMX is not making it?
Below are my ftp settings, and mxdiags file...
Regards
Manos SV1IW
[FTP site]
Host=10.0.0.54
Port=21
Username=sv1iw
Password=xxxxxxxx
Directory=
AutoUpdate=1
ActiveFTP=0
Sslftp=0
FTPlogging=1
UTF8encode=1
EnableRealtime=1
RealtimeFTPEnabled=1
RealtimeTxtFTP=1
RealtimeGaugesTxtFTP=0
RealtimeInterval=30000
UpdateInterval=15
IncludeSTD=1
IncludeGraphDataFiles=1
FTPRename=0
DeleteBeforeUpload=0
I am using lately CumulusMX on a raspberry pi 2 Model B. Everything seems to be working in order except some ftp issues. To be more specific. I use ftp to upload data to another Raspberry pi on my local network which serves as a Web Server. The only file that seems to be uploaded successfully is realtime.txt. All others from "/web" folder as you can see in the diagnostic file attached, say that cannot be created. Another clue from the ftplog.txt file is these messages (for every single file not uploaded) " Could not get file size" and "Could not create file".
I have checked file permissions on both ftp servers although I use /home/user folder which the user can use with read/write permissions and all seems fine. Finally I used a Windows ftp client with the same credentials like Cumulus MX and it is working fine as well.
Any suggestions /ideas why CumulusMX is not making it?
Below are my ftp settings, and mxdiags file...
Regards
Manos SV1IW
[FTP site]
Host=10.0.0.54
Port=21
Username=sv1iw
Password=xxxxxxxx
Directory=
AutoUpdate=1
ActiveFTP=0
Sslftp=0
FTPlogging=1
UTF8encode=1
EnableRealtime=1
RealtimeFTPEnabled=1
RealtimeTxtFTP=1
RealtimeGaugesTxtFTP=0
RealtimeInterval=30000
UpdateInterval=15
IncludeSTD=1
IncludeGraphDataFiles=1
FTPRename=0
DeleteBeforeUpload=0