Page 2 of 2

Re: pre made raspberry pi - Cumulus mx img

Posted: Wed 30 May 2018 9:02 am
by markkkk42
I am in the same boat..not enough discussions here to be able to PM..can you pm me please. Does your image allow headless booting?..I am struggling to get it working now. managed to get the Pi 3 actually working but I have to manually boot it when I want to stop and start. I also have another issue when i am looking at Cumulus on my network on port 8998 it shows for about 45 sec then drops out and I have to reload...is that some setting I have wrong?

Re: pre made raspberry pi - Cumulus mx img

Posted: Wed 30 May 2018 9:07 am
by markkkk42
I saw the post about the different versions of mono. I am running at the moment on this station FO sensors but have some Inspeed sensors soon to be on another station. I run a Weatherduino pro2Plus as the interface and that comes up as a Davis VP2 and seems to be working fine just that it keeps dropping the local lan output

Re: pre made raspberry pi - Cumulus mx img

Posted: Mon 11 Jun 2018 10:13 pm
by ExperiMentor
Dazza kindly sent me a copy of his image, but I could not get it to work. He’s tried to add some helpful things, but means it ends up with a non-standard Raspberry Pi operating system which makes problems hard to work out.
I gave up on it.

Re: pre made raspberry pi - Cumulus mx img

Posted: Mon 11 Jun 2018 11:34 pm
by dazza1223
Weather Station: Fine Offset
Operating System: Windows 7; Linux
Location: Switzerland
Contact: Contact ExperiMentor
Re: pre made raspberry pi - Cumulus mx img
Postby ExperiMentor » Mon Jun 11, 2018 11:13 pm

Dazza kindly sent me a copy of his image, but I could not get it to work. He’s tried to add some helpful things, but means it ends up with a non-standard Raspberry Pi operating system which makes problems hard to work out.
I gave up on it.


what dint you get to work mono???

Re: pre made raspberry pi - Cumulus mx img

Posted: Tue 19 Jun 2018 3:24 am
by DanielLBowles1
dazza1223

Like others I am too new and unable to DM would you be able to send me the link for the pre built image?

-Daniel

Re: pre made raspberry pi - Cumulus mx img

Posted: Fri 29 Jun 2018 2:41 pm
by harrym1byt
I have a Pi 3 B+ ordered and I too would appreciate a copy of the image please dazza or dazza1223.

Re: pre made raspberry pi - Cumulus mx img

Posted: Fri 29 Jun 2018 2:56 pm
by dazza1223
hi you can call me dazza if u want!!! and im going to get the pi 3b+ soon.. what do u want jessie /STRETCH but ive upgrade this but it not good so ive gone back up two jessie

Re: pre made raspberry pi - Cumulus mx img

Posted: Sun 01 Jul 2018 8:52 pm
by radilly
I'm trying to find a version of mono to use with Stretch Lite. So far I've not found one that will find my usb-connected fine offset PWS when I start CumulusMX.

I've done a number of installs of a clean Stretch and considered imaging the sd card without mono so I could easily get back to that point. Alternatively I've started making notes to write a bash script to handle most of the configuration on top of a clean Stretch. Anyone consider that approach? For this sort of thing I typically make notes and comment out blocks of lines as I try different things, much as I see in config files commonly.

Seems like an alternative that might allow a little more flexibility? (In my case, with a fine offset station, it seems the newer version of mono definately won't work.)

Cheers,
Bob

Re: pre made raspberry pi - Cumulus mx img

Posted: Sun 01 Jul 2018 10:04 pm
by dazza1223
hi bob i did upgrade on my pi it got php 7.0 and it was giving me so much sh**t so i downgraded it back to jessie but i did make for ppl on her a pre made img with mono 4.0 but fine off set thay take 3.0 or somthink like that but if u give me so time i will make a img wirh mono 3.1 for the ones who got fine off set st :)