Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Help to understand my Dad's system

Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.
DanBristol
Posts: 2
Joined: Mon May 07, 2018 12:39 am
Weather Station: Davis Vantage Pro 2
Operating System: Raspberry Pi

Help to understand my Dad's system

Postby DanBristol » Mon May 07, 2018 12:56 am

Hi All,
Not sure if this is doable over the web, but hopefully someone can shed some light. Unfortunately my father passed away suddenly at the start of March - he was a member here and had a weather station (Davis Vantage Pro 2) that updated a website. A few weeks later, the website stopped updating. My mum's just realised and asked me if I could work out what's going on. I've got so far, but reached a dead end and wondered if anyone on here could give a few pointers.

The set up:
The Vantage Pro is updating the reciever (display shows current weather etc). This is then connected to a usb hub which in turn goes to his Raspberry Pi. There's an SD card in the Pi itself, which is labelled settings. Also connected to the hub is an external hard drive. This drive contains all the files & folders for Culumus MX - the last date any of the logs have been updated with matches the last update shown on the website. I can't find any files or folders relating to Culumus anywhere else. No one has used the Pi since before Dad died until I logged onto it tonight - I had to use Admin and reset his password as we didn't know it.

I can't find anything that shows that Culumus MX is actually running on the Pi (although I've not used one before). Is there a command that I can use to check this? Or can I just 'start' Cumulus MX again? Obviously we've tried restarting the Pi, but that's had no effect.

Any help would be gratefully recieved. Dad really enjoyed his weather station and it seems a shame to just stop it when he worked so hard to get it going! He was always really grateful for the help he got from the people on here too - so in family tradition I thought I'd ask too!

Cheers
Dan

DanBristol
Posts: 2
Joined: Mon May 07, 2018 12:39 am
Weather Station: Davis Vantage Pro 2
Operating System: Raspberry Pi

Re: Help to understand my Dad's system

Postby DanBristol » Mon May 07, 2018 8:35 am

Have just found a folder of notes that Dad wrote about the set-up! All very helpful and seem to have done the trick... he'd be very pleased!

User avatar
mcrossley
Posts: 5171
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Stretch Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Help to understand my Dad's system

Postby mcrossley » Mon May 07, 2018 8:45 am

Sorry to hear about your Dad, but I'm glad you got it going.

I suspect he was using something like "screen" to launch Cumulus (like me!), this requires user interaction to restart Cumulus if the rPi is rebooted. You may want to investigate this script [http://sandaysoft.com/forum/viewtopic.php?f=27&t=13767] which will restart Cumulus automatically on reboot.

Do you have a link to the website?

ExperiMentor
Posts: 31
Joined: Tue Nov 24, 2015 11:30 pm
Weather Station: Fine Offset
Operating System: Windows 7; Linux
Location: Switzerland

Re: Help to understand my Dad's system

Postby ExperiMentor » Mon May 07, 2018 8:00 pm

mcrossley wrote:I suspect he was using something like "screen" to launch Cumulus (like me!), this requires user interaction to restart Cumulus if the rPi is rebooted.


I'm unsure why the 'screen' script method has become so popular. It's much easier to just use 'cron' and run Cumulus as a background task, autostarting at every reboot.And I set my Pi to reboot in the early hours each day in case there's a problem when I'm away on holiday.

See viewtopic.php?f=27&t=13767&start=396

User avatar
mcrossley
Posts: 5171
Joined: Thu Jan 07, 2010 9:44 pm
Weather Station: Davis VP2
Operating System: Stretch Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Help to understand my Dad's system

Postby mcrossley » Mon May 07, 2018 9:20 pm

I now use cron and screen, screen just makes it easy for me to reattach/detach to Cumulus to check what is going on.


Return to “Cumulus MX”

Who is online

Users browsing this forum: No registered users and 4 guests