Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Cumulus MX base OS and set-up advice

Discussion of version 3 of Cumulus, which runs on Windows, Linux, and OS X. All Cumulus MX queries in here, please.
SunDial
Posts: 8
Joined: Tue Jan 03, 2017 8:12 pm
Weather Station: OS WMR928N
Operating System: Win10

Cumulus MX base OS and set-up advice

Postby SunDial » Mon May 21, 2018 1:10 pm

Hi All,

Pardon my inexperience here but I purchased an Orange Pi Lite for the purpose of running Cumulus MX with my OS WMR928. I couldn't find system requirements for Cumulus MX on either Ubuntu, Linux or Raspberry PI but I guess it's on the Sandysoft forum somewhere. Assuming my Orange Pi Lite is compatible, could someone direct me to a link or post that suggests the best OS for my Orange Pi on which to run Cumulus MX? Additionally, I understand that I may need a data logger to be able to feed the data to Cumulus MX, unless Cumulus MX has this built in? Any advice gratefully received. :)

Tony

User avatar
steve
Cumulus Author
Posts: 26517
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus MX base OS and set-up advice

Postby steve » Mon May 21, 2018 2:21 pm

The system requirements are in the announcement post which contains the download file. For Linux, you need libudev0 and a suitable version of Mono. The version of Linux you use is up to you, as long as you can also install the required packages. This may not be straightforward, as libudev0 may not be available, and there are compatibility issues with later versions of Mono. The Mono issue should not affect your WMR928. There are ways around the lack of libudev0, by using libudev1 and symlinks, a search of the forum should find some useful information.

As you will have seen from my posts, I have not had a lot of time to spend on Cumulus in recent times, hence the difficulties associated with the installation. This may change in the future.

You don’t need anything else to be able to use your station with MX.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job

SunDial
Posts: 8
Joined: Tue Jan 03, 2017 8:12 pm
Weather Station: OS WMR928N
Operating System: Win10

Re: Cumulus MX base OS and set-up advice

Postby SunDial » Mon May 21, 2018 2:42 pm

Hello Steve,

Thank you very much for your advice. I wondered if there might be different hardware specs depending on the OS chosen but I will follow your advice regarding the announcement post. I was thinking I would like to install Ubunto or Raspberry Pi as I believe these are the most user-friendly OSs supported on the Orange Pi Lite. Would you know if Ubunto server or desktop or either would be compatible in this case (as Orange Pi offer both as downloads)? Is Cumulus officially supported on Raspberry Pi? I just noticed a thread that somehow I missed on the Cumulus forum (viewtopic.php?f=27&t=16931).

Thanks for your help and I hope things are settling down for you.

Tony

User avatar
steve
Cumulus Author
Posts: 26517
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus MX base OS and set-up advice

Postby steve » Mon May 21, 2018 2:49 pm

It shouldn’t matter what hardware you use or what version of Linux, as long as you can install the required packages, and connect your station to it.

A Raspberry Pi running Raspbian (Wheezy, I think) was what I used for testing MX on Linux, and for runnng my own weather station until it closed.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job

SunDial
Posts: 8
Joined: Tue Jan 03, 2017 8:12 pm
Weather Station: OS WMR928N
Operating System: Win10

Re: Cumulus MX base OS and set-up advice

Postby SunDial » Mon May 21, 2018 2:52 pm

Ah okay. Got it. Thanks Steve. :) :) :)

philpugh
Posts: 126
Joined: Tue May 24, 2011 8:34 am
Weather Station: DAVIS VantageVue
Operating System: Debian Jessie
Location: Antrobus, Cheshire
Contact:

Re: Cumulus MX base OS and set-up advice

Postby philpugh » Sat May 26, 2018 8:52 pm

Just be aware that Raspberry Pi 'look alikes' aren't. They have kernel's that are not kept up to date with the releases of the operating systems. I fell for that when I bought my BananaPi Pro a few years ago. Great machine - but it has reached the end of life as far as the OS (Debian) is concerned. It continues to run my Davis VantageVue very well - but running the webserver is getting problematic as it struggles to run CERTBOT for HTTPS compliance. A modern Orange/Banana ... system will be OK but don't expect great support from the makers.
Phil Pugh
Davis Vantage Vue Raspberry Pi 2B Stretch-Lite MySQL 128Gb SSD
http://goosegate.plus.com/

User avatar
Toxic17
Posts: 755
Joined: Mon May 19, 2014 10:45 pm
Weather Station: Davis VPro2 Plus
Operating System: Deb 9.4 Stretch
Location: Bangor, NI
Contact:

Re: Cumulus MX base OS and set-up advice

Postby Toxic17 » Tue May 29, 2018 1:01 pm

I'm running mine on an Intel NUC DN2820FYKH 8GB Ram and a 120GB SSD. It seems to work well.
Regards Simon

https://www.conligwx.org
https://www.conligwx.org/pws/
https://twitter.com/conligwx
Davis Vantage Pro2+ - CumulusMX v3.0.0 (build 3043) + Saratoga/PWS
Image


Return to “Cumulus MX”

Who is online

Users browsing this forum: No registered users and 9 guests