If you use Cumulus, please donate Image

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

APRS Internet Beacon

Share your Cumulus MX user interface here
kjunkin260
Posts: 2
Joined: Mon Jan 09, 2017 9:56 pm
Weather Station: Vantage Pro 2
Operating System: Raspberry Pi

APRS Internet Beacon

Postby kjunkin260 » Mon Jan 30, 2017 5:41 pm

Is there any way to modify the CumulusMX interal file, or beacon statement that generates the weather data being transmitted to APRS-IS servers. My station is connected to APRS-IS with my ham callsign, and then a IGate picks up the online beacon, and transmitts it over the APRS frequency. The question is this. On the tail end of the beacon there is "eCumulusDsVP". Is there a way to edit that portion of the beacon, or even add to the beacon line. I don't have it going through an APRS software to use the wxnow.txt file to transmitt. Just want to add a site location to the beacon stream.

User avatar
steve
Cumulus Author
Posts: 25820
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: Davis VP2
Operating System: Raspbian
Location: Sanday, Orkney
Contact:

Re: APRS Internet Beacon

Postby steve » Thu Feb 02, 2017 4:28 pm

No, sorry, that's not possible.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Like Cumulus and want to support it? Please donate! Image


Return to “Customisation”

Who is online

Users browsing this forum: No registered users and 2 guests