IMPORTANT! The server may go down soon - possibly permanently. Please read the latest post in Announcements and News

I strongly advise all users using my server for their web site to make alternative arrangements.

Outgoing mail is disabled because of the malware on the server. No new forum registrations are currently possible, and mail to the forum administrator will not work.

Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

APRS Internet Beacon

Share your Cumulus MX user interface here
kjunkin260
Posts: 1
Joined: Mon Jan 09, 2017 9:56 pm
Weather Station: Vantage Pro 2
Operating System: Raspberry Pi

APRS Internet Beacon

Postby kjunkin260 » Mon Jan 30, 2017 5:41 pm

Is there any way to modify the CumulusMX interal file, or beacon statement that generates the weather data being transmitted to APRS-IS servers. My station is connected to APRS-IS with my ham callsign, and then a IGate picks up the online beacon, and transmitts it over the APRS frequency. The question is this. On the tail end of the beacon there is "eCumulusDsVP". Is there a way to edit that portion of the beacon, or even add to the beacon line. I don't have it going through an APRS software to use the wxnow.txt file to transmitt. Just want to add a site location to the beacon stream.

User avatar
steve
Cumulus Author
Posts: 26696
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: APRS Internet Beacon

Postby steve » Thu Feb 02, 2017 4:28 pm

No, sorry, that's not possible.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job


Return to “Customisation”

Who is online

Users browsing this forum: No registered users and 3 guests