Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
APRS Internet Beacon
Moderator: mcrossley
-
- Posts: 1
- Joined: Mon 09 Jan 2017 9:56 pm
- Weather Station: Vantage Pro 2
- Operating System: Raspberry Pi
APRS Internet Beacon
Is there any way to modify the CumulusMX interal file, or beacon statement that generates the weather data being transmitted to APRS-IS servers. My station is connected to APRS-IS with my ham callsign, and then a IGate picks up the online beacon, and transmitts it over the APRS frequency. The question is this. On the tail end of the beacon there is "eCumulusDsVP". Is there a way to edit that portion of the beacon, or even add to the beacon line. I don't have it going through an APRS software to use the wxnow.txt file to transmitt. Just want to add a site location to the beacon stream.