Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Previous month rainfall and temp not updating

Discussion and questions about Cumulus weather station software version 1. This section and its subforums are the main place to get help with Cumulus. Anything which is not specific to the type of weather station goes in here; for anything specific to a type of weather station, please use the appropriate subforum. Use the 'website development' section for any questions relating to creating or running a web site for Cumulus data. Discussion of the stations themselves in these sections is fine.
User avatar
Philip
Posts: 14
Joined: Thu Jan 21, 2010 12:05 am
Weather Station: Maplin N96GY
Operating System: windows Xp Sp3
Location: Rushden Northants England
Contact:

Previous month rainfall and temp not updating

Postby Philip » Sun Apr 15, 2018 5:38 pm

Has anybody else had this problem and if so how did you fix it please?

On the 2nd of April a power failure on my remote weather station (3 miles from home ) caused the laptop batteries to discharge and the laptop to shut down without shutting down Cumulus. This has happened twice before and on restoring power everything restarts: Cumulus picks up the missing data from the weather station and all is well
.
However this time the computer powered down at about 15:30 and was not restored until the following day. Again cumulus picked up the missing data and all appeared well: however at midnight when the daily rainfall and max/min temps should have updated nothing happened and the update has failed every day since.

I have twice powered down Cumulus and the laptop, also removing the batteries from the weather station, to effect a clean restart and this has had no effect.

The problem can be viewed at:- http://www.jollyroger2.eclipse.co.uk/weather in the trends tab.

Any help would be appreciated

Philip
You do not have the required permissions to view the files attached to this post.

User avatar
steve
Cumulus Author
Posts: 26491
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Previous month rainfall and temp not updating

Postby steve » Mon Apr 16, 2018 12:06 pm

From your web site, it appears that it did the midnight rollover successfully last night?
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job

User avatar
Philip
Posts: 14
Joined: Thu Jan 21, 2010 12:05 am
Weather Station: Maplin N96GY
Operating System: windows Xp Sp3
Location: Rushden Northants England
Contact:

Re: Previous month rainfall and temp not updating

Postby Philip » Mon Apr 16, 2018 7:53 pm

Hello Steve

Thanks for the swift response, the midnight rollover and update of the months rainfall and temp highs and lows all seem to be working normally. It is just the two graphs that are not updating as per the attached screen dumps.

Philip
You do not have the required permissions to view the files attached to this post.

User avatar
steve
Cumulus Author
Posts: 26491
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Previous month rainfall and temp not updating

Postby steve » Tue Apr 17, 2018 7:31 am

Not updating just on the web site or in Cumulus too? If both, then you may have a corruption in dayfile.txt. Normally the red error light would be flashing if that were the case. The latest diags file may have error messages regarding the file, telling you where the problem is (as would clicking on the error light if it was flashing).
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job

User avatar
Philip
Posts: 14
Joined: Thu Jan 21, 2010 12:05 am
Weather Station: Maplin N96GY
Operating System: windows Xp Sp3
Location: Rushden Northants England
Contact:

Re: Previous month rainfall and temp not updating

Postby Philip » Tue Apr 17, 2018 8:28 am

Good morning
FIXED IT
Grand order of the digit trouble! When I restarted the laptop after it's crash I had to set the bios again including the date. I made an error and put in 2017: that is all it was. Lesson learned! :groan:


Return to “Cumulus 1”

Who is online

Users browsing this forum: No registered users and 4 guests