My V1.4 build 1097 tends to crash and lock up my PC every few weeks. Restarting Windows and Cumulus resets the software and the Davis data logger downloads the missed data.
I thought that perhaps updating to build 1099 might prevent such crashes.
However when I tried to use CumulusSetup 1099...the update stopped with the following error statement:
"Delete File Failed: Code 5. Access Denied"
Is it safe to use the uninstall program "unist000.exe" located in the Cumulus folder?
If so, will the new build 1099 download the required communications data from the latest backup file, etc.?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Unable to use get CumulusSetup Build 1099 to run...
-
- Posts: 17
- Joined: Sat 21 Jun 2014 1:11 pm
- Weather Station: Davis Vantage Pro 2
- Operating System: Windows XP
- Location: United States
-
- Posts: 272
- Joined: Tue 28 May 2013 1:06 am
- Weather Station: Davis VP2 Plus
- Operating System: Raspian Buster (RPi 3b)
- Location: Tulsa, OK
Re: Unable to use get CumulusSetup Build 1099 to run...
That almost sounds like you're still running Cumulus while you're either trying to update it, or trying to uninstall it.
Make sure the program is stopped when you're trying to install or update it.
Make sure the program is stopped when you're trying to install or update it.
-
- Posts: 17
- Joined: Sat 21 Jun 2014 1:11 pm
- Weather Station: Davis Vantage Pro 2
- Operating System: Windows XP
- Location: United States
Re: Unable to use get CumulusSetup Build 1099 to run...
As Homer Simpson says "DOH !!!" Thanks...
-
- Posts: 272
- Joined: Tue 28 May 2013 1:06 am
- Weather Station: Davis VP2 Plus
- Operating System: Raspian Buster (RPi 3b)
- Location: Tulsa, OK
Re: Unable to use get CumulusSetup Build 1099 to run...
Also, I think if you either update or uninstall it, the data files still remain in the folder. It's been so long since I've used 1.9 that I can't remember, but seem to remember an option maybe that had the uninstaller delete the data files. DON'T.
- PaulMy
- Posts: 3868
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Unable to use get CumulusSetup Build 1099 to run...
Data files are not affected by updating Cumulus. However the Cumulus standard files such as indexT.htm, todayT.htm, etc would be over ridden, if I recall correctly, unless you tick (or maybe untick) that option in the install process.
Enjoy,
Paul
Enjoy,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm