Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Automatic shutdown...

Discussion and questions about Cumulus weather station software version 1. This section and its subforums are the main place to get help with Cumulus. Anything which is not specific to the type of weather station goes in here; for anything specific to a type of weather station, please use the appropriate subforum. Use the 'website development' section for any questions relating to creating or running a web site for Cumulus data. Discussion of the stations themselves in these sections is fine.
Tidalwave123
Posts: 17
Joined: Sat Jun 21, 2014 1:11 pm
Weather Station: Davis Vantage Pro 2
Operating System: Windows XP
Location: United States

Automatic shutdown...

Postby Tidalwave123 » Mon Nov 13, 2017 2:56 pm

I run Cumulus 24/7. I feed data to NOAA/Weather Service and also several independent sites. My old Windows XP ran with 'never off' power settings, using a UPS unit. However, about every two weeks, the PC would 'lock-up' with Cumulus stalled. I would have to power reboot the PC and Cumulus. The Davis Logger would immediately restart and load Cumulus with the missing data. I used CCleaner to delete any extraneous temp files that would build up. The PC was only used for Cumulus and to manually send data via FireFox to a local TV station.

I switched Cumulus over to a new PC running Windows 8 64-bit with additional RAM. I set power settings to 'never off'.
The new PC Windows also 'shuts down' about every 10-14 days and has to be power re-booted.

I would appreciate any help to fix this problem.

User avatar
Toxic17
Posts: 562
Joined: Mon May 19, 2014 10:45 pm
Weather Station: Davis Vantage Pro2 Plus
Operating System: Debian 9.1 Stretch
Location: Bangor, NI
Contact:

Re: Automatic shutdown...

Postby Toxic17 » Tue Nov 14, 2017 11:21 pm

First of all I take it you are running Windows 8.1 (with 8.1 update installed too) and not just Windows 8?

Take a look at the example here:

https://support.wdc.com/knowledgebase/a ... px?ID=3875

make sure you go into the Advnaced settings of the Power plan and disable any and everything that affects sleep.

you will also need to make sure Power management is unticked in ANY USB devices/hubs listed ( in device manager, USB, select each hub/port and select Properties, Power Management) as this could affect your Davis USB logger too.

untick the "allow the computer to turn off this device to save power." in Power Management.

Also do this for your network port too.

Also in the Bios, make sure C States is disabled along with any power management (S3/S5 Sleep states) and or Speed stepping.

Also in an Admin command prompt window run the following:

powercfg /H off

that will turn of Hibernation. then run:

powercfg /A

this list all your sleep states on the machine.

this is a list from my Windows 10 box (not a 24/7 PC) as an example.

Code: Select all

C:\>powercfg /A
The following sleep states are available on this system:
    Standby (S3)

The following sleep states are not available on this system:
    Standby (S1)
        The system firmware does not support this standby state.

    Standby (S2)
        The system firmware does not support this standby state.

    Hibernate
        Hibernation has not been enabled.

    Standby (S0 Low Power Idle)
        The system firmware does not support this standby state.

    Hybrid Sleep
        Hibernation is not available.

    Fast Startup
        Hibernation is not available.


Code: Select all

C:\>powercfg /l

Existing Power Schemes (* Active)
-----------------------------------
Power Scheme GUID: 381b4222-f694-41f0-9685-ff5bb260df2e  (Balanced)
Power Scheme GUID: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c  (High performance) *
Power Scheme GUID: a1841308-3541-4fab-bc81-f71556f20b4a  (Power saver)
Regards Simon

https://www.conligwx.org
https://www.conligwx.org/pws/
https://www.conligwx.org/pws1/

https://twitter.com/conligwx
Davis Vantage Pro2+ - CumulusMX v3.0.0 (build 3043) + Saratoga/PWS
Image


Return to “Cumulus 1”

Who is online

Users browsing this forum: No registered users and 9 guests