I can't seem to get the wet bulb calibration to work.
Cumulus is set up for an Instromet station and the 'extra sensor' box checked to reveal the wet bulb sensor as the extra temperature sensor. However, when I change the wet bulb calibration setting nothing happens.
Calibration of relative humidity is fine when the 'extra sensor' box is unchecked.
Maybe the extra sensor being shown is not the station's wet bulb sensor?
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Wet Bulb Calibration
-
- Posts: 1
- Joined: Fri 11 May 2018 8:22 am
- Weather Station: EasyWeather
- Operating System: Windows 10 version 1511
- Contact:
Wet Bulb Calibration
Dịch vụ giup viec nha chuyên nghiệp giúp việc nhà tại tphcm
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Wet Bulb Calibration
With 'extra sensors' selected, the second temperature reading is used simply as an extra temperature reading (with no calibration possible). With it unselected, the second temperature reading is used as the wet bulb temperature, to which the wet bulb calibration settings are applied.
Steve