Have you supplied the FULL correct serial device name? Have you looked at the FAQ as I suggested, where you would see the following?
"Serial device names on Linux are not COM0 etc as in Windows. You need to specify something like /dev/ttyUSB0 - do a dmesg at a command line prompt and look for the actual device name from your adapter. If dmesg says your cp210x converter (as on Davis stations) is attached to ttyUSB0, for example, you need to put /dev/ttyUSB0 for the serial port name in MX. "
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4021) - 04 May 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Cumulus1 how to enter data
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
I posted this earlier:
I have put USB0 as the Davies connection serial port name, but still no data. When I run the CumulusMX program it says :
Unable to connect to station Cumulus running at: http://*:8998/
Also as you suggested, I have now got /dev/ttyUSB0 and it is now connected.
Actually you are the first person to tell me that.
Thanks
I have put USB0 as the Davies connection serial port name, but still no data. When I run the CumulusMX program it says :
Unable to connect to station Cumulus running at: http://*:8998/
Also as you suggested, I have now got /dev/ttyUSB0 and it is now connected.
Actually you are the first person to tell me that.
Thanks
- ConligWX
- Posts: 1637
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 24.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulus1 how to enter data
Your MXDiag logs say differentavvy65 wrote:No I didn't use port 9999.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
Weired that, but I couldn't find it where was port 9999.
No wories. thanks again
No wories. thanks again