Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Cumulus1 how to enter data
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Cumulus1 how to enter data
I would like to know if there is a way of entering new data into cumulus1 , so that records are kept.
Is this possible with cumulus.
Is this possible with cumulus.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Cumulus1 how to enter data
You can edit the data files, the formats are in the help and the wiki. There are also facilities in Cumulus 1 for generating the daily summaries in dayfile.txt and the all-time records, once you have entered data into the monthly log files.
Steve
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
I should also have said that I am running Linux Ubuntu, and when I installed the cumulus1 for linux, all I got was a desktop applet.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Cumulus1 how to enter data
Cumulus 1 only runs on Windows. Cumulus MX will run on Linux, with Mono installed.
Steve
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
Ok, thanks, I now have mono-complet installed and I'm looking for cumulusmx for linux.
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
Ok thanks for the link, and after reading throught the post I have now got CumulusMX installed. Then did sudo mono CumulusMX.exe which started the engine. I have a webpage open on port 8998, but after connecting my Davies Vantage Vue by usb, there is no data showing.
Is the seriel port name that which the engine produces: Serial: C060126AD8F30EC346103EDF4635146C
Or is the default COM0
And probably because the port is wrong the station cannot be connected.
Is the seriel port name that which the engine produces: Serial: C060126AD8F30EC346103EDF4635146C
Or is the default COM0
And probably because the port is wrong the station cannot be connected.
- ConligWX
- Posts: 1619
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulus1 how to enter data
You have said you connected your Davis Console "after" running cumulus. you should connect your console to your PC, then run CumulusMX.
What does your MXDIAG folder show? Please zip the folder contents and attach the files to a post.
What does your MXDIAG folder show? Please zip the folder contents and attach the files to a post.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: Cumulus1 how to enter data
Serial port names on Linux do not look like 'COM0'. There is information in the MX FAQ about this.
Steve
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
Yes I realised that afterwards, and they are something like ttyS0, but I don't know what exactly. I have tried ttyUSB0, but that made no difference.
Actually I wondere if this is the USB port :
Bus 003 Device 007: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light, but again no data showing
Actually I wondere if this is the USB port :
Bus 003 Device 007: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light, but again no data showing
You do not have the required permissions to view the files attached to this post.
- ConligWX
- Posts: 1619
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulus1 how to enter data
That is the device yes. not the port though. So try this via a SSH terminal prompt.avvy65 wrote:Yes I realised that afterwards, and they are something like ttyS0, but I don't know what exactly. I have tried ttyUSB0, but that made no difference.
Actually I wondere if this is the USB port :
Bus 003 Device 007: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light, but again no data showing
dmesg | grep tty
root@conligwx:~# dmesg | grep tty
[ 0.000000] console [tty0] enabled
[ 0.923176] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.702529] usb 1-3: cp210x converter now attached to ttyUSB0
root@conligwx:~#
so Mine is on ttyUSB0 Port. enter whatever yours says into the CumulsMX GUI. then CumulusMX should be able to read your console.
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
- ConligWX
- Posts: 1619
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulus1 how to enter data
Maybe worth moving this to the CumulusMX subforum if any mod is able too?
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
I have put USB0 as the Davies connection serial port name, but still no data. When I run the CumulusMX program it says :
Unable to connect to station Cumulus running at: http://*:8998/
Unable to connect to station Cumulus running at: http://*:8998/
- ConligWX
- Posts: 1619
- Joined: Mon 19 May 2014 10:45 pm
- Weather Station: Davis vPro2+ w/DFARS + AirLink
- Operating System: Ubuntu 22.04 LTS
- Location: Bangor, NI
- Contact:
Re: Cumulus1 how to enter data
avvy65 wrote:I have put USB0 as the Davies connection serial port name, but still no data. When I run the CumulusMX program it says :
Unable to connect to station Cumulus running at: http://*:8998/
So did the terminal session say "ttyUSB0" then use that as the port.
the unable to connect is probably due to you starting Cumulus with the following:
Code: Select all
2018-08-13 09:55:10.155 Command line: /home/rob/CumulusMX/CumulusMX.exe -port 9999
can you fist of all confirm the output of:
Code: Select all
dmesg | grep tty
Regards Simon
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
https://www.conligwx.org - @conligwx
Davis Vantage Pro2 Plus with Daytime FARS • WeatherLink Live • Davis AirLink • PurpleAir • CumulusMX v4.0.0
-
- Posts: 39
- Joined: Sun 12 Aug 2018 4:52 pm
- Weather Station: Davies Vantage Vue
- Operating System: Linux Ubuntu
Re: Cumulus1 how to enter data
No I didn't use port 9999.
Current culture: English (United Kingdom)
Serial: C060126AD8F30EC346103EDF4635146C
Cumulus MX v.3.0.0 build 3043
Today.ini = data/today.ini
Last update=2018-08-13T14:23:33
Unable to connect to station
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
Starting web socket server on port 8002
13/08/2018 14:23:34
Type Ctrl-C to terminate
Current culture: English (United Kingdom)
Serial: C060126AD8F30EC346103EDF4635146C
Cumulus MX v.3.0.0 build 3043
Today.ini = data/today.ini
Last update=2018-08-13T14:23:33
Unable to connect to station
Cumulus running at: http://*:8998/
(Replace * with any IP address on this machine, or localhost)
Starting web socket server on port 8002
13/08/2018 14:23:34
Type Ctrl-C to terminate