Building up some good ideas now. Agree with the data logger. While I was on holiday recently Cumulus was accidently exited so when I returned I have no data for a 10 day period. I think ?? if it had been able to read my data logger it could have downloaded the info and fill the gaps ?
Other things from my point of view
1. Rainfall - simple edit function without going into the data files. I have tried to get my Davis raingauge to be as similar as possible to my official Met gauge but its normally out,l sometimes by an odd 0.2mm or so but occassionally by 1-2mm. If I could edit this data a more accurate figure could be achieved. Some may say I should just allow the two gauges to carry on, but I would prefer the rainfall at least to reflect my Met gauge
2. When cumulus is minimsed to the taskbar ? instead of showing up as "Cumulus" could it show up the brief weather details and update itself, eg SW 0.9knots +12.3c- saves bringing the whole programme up ?
3. Battery Indication of Sensor ( VP2 ) if possible- I am not sure if this data is transmitted to the console or not, sounds a good idea though
4. Signal Strength of Sensor to Console - important for me as its range is at its limit and needs adjustment now and again. If I can readily see its falling away I could move to prevent missed data
5. Report Function
To add Number of Rain Days of 25mm + dates (1000-1000hrs) 0900-0900hrs winter
Number of days over 0.2mm
Number of days over 1.0mm
Number of days over 5.0mm
Pressure at 0900hrs day - monthly mean
I,m sure there may be a few more !!
tks