Sandaysoft

Hello

Cumulus is not sending the data to my Twitter account? I have it configured with the correct username and password, this is happening only with Twitter because Cumulus is sending the data to http://www.pwsweather.com/obs/RAYMER88.html and also to http://www.wunderground.com/cgi-bin/findweather/getForecast?query=10.617%2C-66.848&sp=IVARGASC2

I do not know what the problem seems to be?

Regards,

Raymer
Venezuela

Seems to be working now? https://twitter.com/Climavargas

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!

Hi Steve,

Yes excellent!!!

I have another question, my station anemometer was damaged and I had to remove to send for repair, since I did that Cumulus stop sending data from the anemometer normal thing, but also stop send the reading of the wind direction is that normal? because on the console of my station the wind direction reading is perfectly shows but not in Cumulus?. I have a PCE-FWS 20 station.

Regards,

Raymer

If you have 'use bearing zero when calm' set, you'll get zero and dashes for the bearing, otherwise you should get the reading from bearing from the station. My test system behaves that way, at least.

Average direction will always be zero if you have no wind speed recorded, because the calculation takes wind speed into account.

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!

Hi steve,

Ok I guess I must wait until they send me the new anemometer and install it again to see if everything calibrate.

Regards,

Raymer