Cumulus error prevents connection to WH1081

ibrahimhcaglayan · **Posted:** Sat Jul 14, 2012 12:31 pm

I have a WH1081 which I purchased in UK at a Maplin store. I have installed it and am using it with the Easyweather software however I wanted to broadcast my station's measurements as my locale is where Turkey's biggest shipyards are and it would be very much in use by ships coming in to anchor. However as I try to run the Cumulus program, I get
RUNTIME ERROR 217 005BCA6E, whatever that is. Can anyone help me? Thanks in advance.

steve · **Posted:** Sat Jul 14, 2012 1:37 pm

Googling suggests that error occurs when an exception happens before the exception handling has been initialised, so I'm afraid it's almost impossible for me to say what the problem is. This happened the first time you ran Cumulus after installing it? Have you tried rebooting and trying to run it again?

ibrahimhcaglayan · **Posted:** Sat Jul 14, 2012 5:37 pm

Hi Steve,

Here is what the error detail is (don't know if it means anything to you)
AppName: cumulus.exe AppVer: 1.9.2.1032 ModName: kernel32.dll
ModVer: 5.1.2600.5781 Offset: 00012afb

I tried the reboot etc with no avail. May it have anything to do with the fact that Easyweather is also running. (I had inactivated the Easyweather though)

Also I have sent a little something to indicate my appreciation for providing such a wonderful program at your own expense.

steve · **Posted:** Sat Jul 14, 2012 5:47 pm

ibrahimhcaglayan wrote:

I tried the reboot etc with no avail. May it have anything to do with the fact that Easyweather is also running. (I had inactivated the Easyweather though)

You shouldn't run Easyweather at the same time, and you should use the Fine Offset station type. But presumably you haven't got as far as choosing a station type, as it crashes before you get to the station settings screen?

Which version have you installed? 1.9.2 build 1032?

ibrahimhcaglayan · **Posted:** Mon Jul 16, 2012 6:15 am

Hi Steve,

I completely uninstalled EasyWeather and re-installed Cumulus. It gives me the same error. I would appreciate your help. I googled it and got this:

Unable to open FMS, runtime error 217
Finance, FMS .May 10
2012.
Issue: Getting runtime error 217 at 0002659E when logging into FMS

Reason: This is caused when their is no printer available to FMS

(Visited 88 times, 5 visits today) ..

I have 2 printers on the net connected to this terminal.

Any suggestions?

steve · **Posted:** Mon Jul 16, 2012 7:25 am

I googled it too, and it clearly occurs with lots of different software; there are hundreds of hits but I didn't find a solution anywhere. There was a suggestion in one place that the problem was something to do with anti-virus, and elsewhere that it was connected with hardware drivers. Unfortunately the error apparently occurs before any of the Cumulus code (that is, code that I wrote) gets executed, so I'm afraid I can't think of anything to suggest. Are there any files in the Cumulus diags folder? Is there a bugreport.txt file in the main Cumulus folder?

You could try installing the 1.9.3 beta (download link in the announcements section) but I think that's unlikely to help.

ibrahimhcaglayan · **Posted:** Mon Jul 16, 2012 11:36 am

Yes there is a bugreport file which I am attaching however it pertains to my installation the first time. There are not any for the latest attempts to install.

steve · **Posted:** Mon Jul 16, 2012 11:42 am

I'm very confused now. The file you've uploaded is from Cumulus 2. Are you trying to run that? The version in the message you quote says "AppVer: 1.9.2.1032" which is definitely Cumulus 1. Also, when you say:

Quote:

There are not any for the latest attempts to install.

do you get the error message that you quoted originally when you try to install Cumulus, or run Cumulus after you've installed it?

ibrahimhcaglayan · **Posted:** Mon Jul 16, 2012 2:15 pm

Here is what happened. I tried to run Cumulus but could not so I asked my IT guy to have a look. He did somethings and he was not successfull either. I guess he must have tried to install another versin and that is why you see that message. But although a bugreport file was prepared for that other version, bo report has been prepared for the version I am trying to install. I don't know if that tells you anything.

Do you reckon I should try the new beta version?

ibrahimhcaglayan · **Posted:** Mon Jul 16, 2012 2:18 pm

I forgot to add that I am getting the runtime error while trying to install the software however due to error, installation is not completed.

steve · **Posted:** Mon Jul 16, 2012 2:22 pm

But the error message you quoted refers to cumulus.exe, which is Cumulus, not to CumulusSetup.exe, which is the installer. Perhaps you could describe exactly what you do before you get the error message?

ibrahimhcaglayan · **Posted:** Mon Jul 16, 2012 2:24 pm

steve wrote:

You could try installing the 1.9.3 beta (download link in the announcements section)

In your website http://www.sandaysoft.com I do not see a section called announcements. Under the section called News, there is no reference to 1.9.3. Am I looking in the wrong place?

nitrx · **Posted:** Mon Jul 16, 2012 2:28 pm

Try this viewtopic.php?f=2&t=7341

ibrahimhcaglayan · **Posted:** Mon Jul 16, 2012 4:44 pm

Thanks for the help nitrx but nothing changes. However, I noticed something: Should I not be seeing my WH1081 in the Control Panel of my computer? I can not see it or I do not understand the name under which it appears. Any help possible with this?

steve · **Posted:** Mon Jul 16, 2012 5:41 pm

It appears as a 'Human Interface Device', and not in any form that you would recognise unless you knew what to look for.

	It is currently Sat May 25, 2013 4:35 am
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1078 - May 24 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

Cumulus error prevents connection to WH1081

Who is online